Coco (Tongari Boushi no Atelier) built papercraft

Coco (Tongari Boushi no Atelier) built papercraft

Already posted my Coco papercraft template:

https://www.deviantart.com/antyyy/art/Coco-Tongari-Boushi-no-Atelier-papercraft-1330383628

And now it’s time to give you some pro-tips on how to make life simpler when building her yourself. Let’s go.

**********************************************************

ASSEMBLY TIPS:

With any of my papercrafts, you can divide the assembly into separate parts: the head with the hair, the 2 arms, the upper torso with the white dress, the butt with the legs and the shoes, the pointy hat and the cape.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair, and lastly close it with the back hair. After this, you can glue on the 2D ears and the optional head lid (which I didn't use in the preview pics btw.).

Next, you can separately build the 2 arms, with either the 2D or 3D hands (*Note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the upper torso. When you have the upper torso, glue the sleeves inside the holes where the arms go and make the rest of the dress.

Set this aside again and make the butt with the legs and shoes. You do this part by assembling the legs from bottom to top and finish with the buttocks part. This means, build the shoes first, glue the leg from there upwards till you come to the butt. If you want her to stand nicely, *pro tip: best put some weights inside the legs before gluing it together (I always use small pebbles I throw inside the legs before I close the whole craft).

What you do now is glue together these parts with the flaps that are left on the belt part of the buttocks. Glue those inside the dress, making sure to glue them at the right angle, so the figure can stand comfortably.

Now that you have the base Coco papercraft, you can also make the hat and cape on it. If you want to glue the cape on, leave the head with the neck part for the end, and only assemble together the torso with the arms and dress, and then the legs. When you have the body, glue on the pre-made cape on her shoulders with glue inside the shoulders and press it down. Once the cape is glued on, press and rotate the neck inside the cape neck part with glue on the flaps, at the right angle and let it dry. The flaps won’t be visible from the inside of the cape and it’s easiest that way. At the end, you can add on the pointy hat and glue it on to finish it.

*Note: The papercraft preview is made with 2D hands. The files for printing-out have both the 2D and 3D hand versions, so you can choose which ones to make.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/cae3878dd9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like her and enjoy the beautifully illustrated anime of the Witch Hat Atelier as much as I am XD Enjoy and happy crafting~

Antyyy's Papercrafts UNDER CONSTRUCTION 3.0

Antyyy's Papercrafts UNDER CONSTRUCTION 3.0

I believe it has been quite a few years since the last »purge« so to speak, so it's about time we do some cleanupin with my posts. As you know, or now know, I always try to do some cleaning up with my old papercraft files, but because of the sheer number of things I have released over the years, the sheer mass of stuff demands some beforehand planning for the actual execution. And what better time to do this then with the start of summer and summer holidays!

It is maybe the 4th, or even 5th “under construction” editing of posts I did over the years I have been in business, but I delete my old stuff all the time, so I can’t keep track of it anymore XD but who cares, I decided it’s going to be the 3.0 cleaning up and the 3.0 new start of quality-made papercraft designs I am still making for probably over 15 years now.

*******

So, what does that mean for you? It means I will be deleting quite a few of my old designs that do not fit my quality-made trademark anymore, since my papercraft skills and designs steadily improve and I do not want any half-assed and half-ugly papercrafts to represent the work that I do.

Most of my old designs will be removed and deleted completely from my shop and they will not be available online anywhere anymore. However, some of them that are still usable and fit my well-made criteria will be shared for FREE as freebies on my Patreon page (https://www.patreon.com/c/antyyyspapercrafts) , where I share FREE papercraft downloads only.

Anything and everything I don’t like will be removed, most deleted for good, some shared for free, and a few remade sometime in the distant future.

So, whatever older designs you wanted to make in my files, now is the time to buy them still, because I don’t guarantee for any of them to stay online for a long time anymore. And you can also look forward to many free releases during the summer (; Now, isn’t that great?

********************

I realize that with the sheer number of papercrafts I make and the current shitty economic state of the world, it is quite useless to have this many papercrafts in my shop that are unmanageable. I would like to focus more on quality-made papercraft designs as much as I can, and make everybody enjoy papercrafts with free releases I have been neglecting over the past few years. The freebies are long overdue, since I have been mostly focusing on commissions this past year and those alone take up most of my design time for my work.

I know that a lot of papercraft designers and artists have quit during these few last years, and the ones remaining are just a handful of good ones, most just trying to scramble-up AI slop to make a few bucks, so there are fewer and fewer actually good templates out there with even less people that are willing to make them. So, this cleanup is somewhat of a redemption ark, trying to do the right thing, making papercrafts available and downloadable for everybody to assemble.

There will always be bad apples in the community, but if I focus just on the shitty ones stealing designs, ideas and patterns and being lazy asses re-selling my work won’t get anybody anywhere. These are the main reasons I do not like to share my patterns for free, but I have come to see that sharing almost nothing for free is the wrong way in fighting this type of behavior. Leading with a good example and work ethic is the way to motivate far more people that actually respect this line of work and dedication to this artform. This is the way in expanding the community with good people that love crafts and want to put their own work and time into it. Making the community bigger and better and actually positive should be the goal of each papercraft builder out there. Only this will make papercrafting a hobby for the future, for many more generations to enjoy and for people to see the magic you can do with your own 2 hands.

*****

I hope I will have your support, the support of the papercraft community, in the coming years as well and you’ll make many more papercrafts you can share online with everybody.

Wish me luck, bear with me, and in the meantime: Happy crafting~

How to open PDO, Assembly help for my papercrafts

How to open PDO, Assembly help for my papercrafts

With all of my official papercraft files, free or paid, you get 2 types of files for assembly: PDF files that you print out in various types (colored and colorless flaps, as well as the lined and lineless versions) and a locked, blank PDO file.

The PDO file is THE main assembly instruction. It is a program with a 3D preview of the papercraft that lets you see how to put the parts together and how it looks assembled. This is THE assembly tutorial and it’s all that you need to build any of them.

*********************

The PDO file is a file opened with Pepakura (Tamasoft) and can be opened by either buying their Pepakura designer:

https://pepakura.tamasoft.co.jp/pepakura_designer/download/

Using a web viewer online (also recommended for Mac users):

https://papercraft-maker.com/

Using ArmorSmith viewer (recommended for Smartphone users):

https://www.armoredgarage.com/

or using my FREE stand-alone PDO-viewer to open the file (recommended, because it will show you the added assembly animation): 

https://mega.nz/file/PwMGlRTR#P26cUauteEdr4-yd5F2oT5mn6IQzdGjZfS-gsKI8s2w

*********************

The PDO Pepakura (Tamasoft) file has an “animation” function that lets you see how the cut parts are put together and folded, so it’s the nr.1 help-file for all of my assemblies. Learn to use it, and you’ll never want to make a papercraft without one (; This is also why no papercraft of mine has a "tutorial" in a traditional sense of picture screenshots or assembly videos. THAT IS WHY you have the PDO FILE INCLUDED. It literally shows you everything in depth and with precision.

*********************

Here is a tutorial explaining how to actually use the program and what it lets you do. It shows an older version, but the basic principles on how it shows what flap needs to be glued together and the edge ID numbers are the same. Just ignore the old links that don't work anymore in there and focus on the Pepakura Viewer display itself: 

youtube.com/watch?v=_lQLLEAIxwc&t=1323s&ab_channel=DanielKrsiak 

AND most importantly, you can also enable an "animation" sequence, that shows you the unfolded parts and how they are put together to make the finished papercraft model at the end. Very useful if you have a bit of trouble with 3D perception and also fun to play with:

https://www.youtube.com/watch?v=4wlpmjDRvf8&ab_channel=pepakuratamasoft

*********************

Note that all of my password locked PDO files are LOCKED FOR A REASON. MEANING THAT ALL OF MY PDO FILES ARE VIEW ONLY. YOU CANNOT ACCESS THE FULL FILES TO EDIT THEM WITH A PASSWORD; EVER!

I never share the original 3D model (just the template, because you are buying the unfolded printable template only), the textures are basic, and the UV-maps for texturing are scrambled and unusable for editing. Do not ask me for any password for any of them, because you won’t get it.

*********************

If you would like for any papercraft I made to be re-sized (made bigger or smaller), you can WRITE ME about that. I have no problem editing the height of any papercraft in reasonable margins, so you don’t need a password for any of them.

*********************

Enjoy and happy crafting~

Yuru (Yomi no Tsugai) papercraft

Yuru (Yomi no Tsugai) papercraft

I always say that there are too little sexy male papercrafts out there, so who am I here but to use my design skills and make some awesome guy papercraft for the world to see! The new long-distance little brother anime of the Fullmetal Alchemist franchise called “Yomi no Tsugai” is being streamed this season, and I love it so far! So, I decided to make a nice main character papercraft of “Yuru”.

*********************

The papercraft is unfolded to 26 cm height (about 22 cm height for just Yuru) and has 7 pages to print out (one of them being a double-sided print page for the hair). It has a 3D figure of Yuru, with a separate 3D bow, simple 3D arrows, a 2D scarf and a 3D stand.

Since he has short hair, the head and hair parts are bit tricker to assemble and take more time. He also has optional 2D or 3D hands.

Because of the bent leg, he has to be attached onto the 3D stand so he can stand in this pose. It is also best to reinforce the 2 legs and filling them out with weights to make it stand better (and optionally the stand as well).

*********************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/b09920d516

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like the new anime. I can definitely see the Fullmetal influence in the character and story, so we’ll see how this one plays off. That said, FMA is a masterpiece in its own, so I don’t think comparing it to that franchise all the time will do Yomi no Tsugai any favors, so its best to enjoy it as its own thing and let the story grip you in its own way. Its 110% worth the watch, since I am enjoying it myself a lot. Definitely one of the best anime this season to look forward to.

Enjoy and happy crafting~

Kit Bodega (Gameoverse) papercraft

Kit Bodega (Gameoverse) papercraft

A really popular series called Gameoverse has released their trailer and people are going crazy for the main cat-like heroine called “Kit Bodega”. So, what a better new subject for a papercraft-ification than her XD

This is Kit Bodega, in a more grown-up stylized design, not as she is seen in the actual series.

*********************

The papercraft is unfolded to 22 cm height and has 3 pages to print out (one of them being a double-sided print page). It has a 3D model of Kit, with separate, simple 3D goggles and 2D whiskers.

The papercrafts has some smaller parts with the 3D tail and the hair. She has an optional lid to close the head in the back.

Because of the big yellow cyborg boots she has, she stands comfortably without needing and reinforcement. You can still fill the 2 legs with small weights just to be sure. 

*********************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2a1d80a965

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like the series! Still have to watch it myself to see what’s it about XD lol

Enjoy and happy crafting~

Pusheen (New Version) built papercraft

Pusheen (New Version) built papercraft

Already released the 2 new versions of Pusheen I made as a papercraft template:

https://www.deviantart.com/antyyy/art/Pusheen-New-Version-papercraft-1338228684

And now here is the assembled preview version as well! Let me give you some tips on how to assemble it as well!

***********************

ASSEMBLY TIPS:

With any of my papercrafts, start from top to bottom. Make the 2 ears separately first, make the 3D tail and glue together the front and back parts of the 4 whiskers and set those aside.

Now you make Pusheen by getting those 2 ears and build the top parts around it first and continue to glue the parts from the top to the middle part. At this point, you can add the 3D tail on and build the remaining bottom stripes on it till you have only the bottom part with no flaps left. You can then simply close the figure by gluing the bottom on it, add the 4 whiskers at the right parts, add the 2D feet and glue them on the bottom, and it’s done.

Since Pusheen is laying down, you don’t need to fill it out or anything.

*NOTE: I only did the laying down version of 2 versions that are included in the template. The purchase includes this laying down and the sitting papercraft versions.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/6cf5b794ce

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Pusheen is just the cutest. Relish in all of hit fat glory with me! :3

Enjoy and happy crafting~

Pusheen (New Version) papercraft

Pusheen (New Version) papercraft

Everybody knows Pusheen! What am I here to explain to you who this adorable little lady is (: (maybe you didn’t know that, but yeah, Pusheen is a girl). However, maybe I can explain a bit on why I am making a new version of her.

10 years ago, 2016, I made my first Pusheen version when I started papercraft designs (It is still online on my Patreon page to download for FREE, with all the other free stuff I got on there). But, needless to say, my designing skills have massively improved since I started all of this, and the old designs are really cringe and weird, and I removed almost all of them, except a few free ones that are still online. So, I wanted to make a new one, that is really simple to assemble, and really adorable, like the mascot we all know and love.

And here she is in all of her cute, fat, kitty glory! :3

***********************

The papercraft is unfolded to 13 cm and has 5 pages to print out. It has both versions included, a sitting and lying down Pusheen papercraft, since the mascot is known in both poses and I couldn’t decide which one to make XD

Both Pusheens are 3D models, so all of their body is a 3D unfold, including the tail and ears. And then you have 2D whiskers and paws to put on at the end.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/6cf5b794ce

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Pusheen is just the cutest. Relish in all of hit fat glory with me! :3

Enjoy and happy crafting~

Eevee house papercraft

Eevee house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 14 cm heigh with 14 pages to print out.

It consists of a mystery dungeon diorama of the Eevee normal starter house, including the in-game references of the house interior as exterior + a simple Eevee model with its scarf. It has all the basic add-ons in the house as around the garden, including the Eevee mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/2b1a5ac678

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Shantae papercraft

Shantae papercraft

Another fan favorite character people wanted to see in papercraft-form for some time now is “Shantae”.

She is a known main heroine from her own Shantae series of games, and has since been in collabs in all kinds of games across all universes. I am sure you know her at least from her sexy looks and design.

Since she first came out, the look has been different in each gen of games, but I decided to go with the most known look for her and not the newest one. I also think she is the cutest-looking in this version and not the newest one, don’t like the new adaptation of her outfit at all XD

**************

The papercraft is unfolded to 22 cm heigh (about 20 cm of Shantae’s height alone without the stand) with 8 pages to print out.

It consists of a 3D model of Shantae (that I made from 0, as goes with 99% of the papercraft model bases I do myself) with a long 3D hair tail, optional 2D or 3D hands, an optional bra and 3D stand. Even with the stand, she will need some additional reinforcement to make her stand comfortably, so I recommend the assembly for more experienced papercrafters only.

*This is an adult, half-naked version, since the bra is optional and can be put on or off and she has fully textured bare breasts!

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/57a69942b5

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the cutie and if you don’t know the games yet, maybe you’ll give them a go as well. Always nice to find and learn about new games you might like from time to time.

Enjoy and happy crafting~

Kasumizawa Miyu (Blue Archive) papercraft commission

Kasumizawa Miyu (Blue Archive) papercraft comm.

A Blue Archive papercraft commission of a different kind. Probably the most detailed papercraft I have made to date, because this Miyu 3D model I made for a PVC figure swap. Meaning the commissioner wanted me to make a 50 cm big Miyu figure, that has all the parts interchangeable and with a lot of detail, so it looks like a real plastic figure when assembled.

The idea was to make a detailed enough model, with all clothing and body parts being able to be swapped with a system of magnets at any given time. All the clothes and parts can be slid on/off as they are, without needing to bend or re-shape them.

This complex papercraft has almost 800 parts and the polygon count is probably 3 to 4-times as much as my normal 20 cm big human papercrafts would be. I had to figure out a whole new system to make this work, a lot of effort and time put into this, not just modeling, but the textures are probably the most detailed ones I made yet.

The figure has a whooping 14 different UV-maps, for each part its own hand-drawn texture, so the details, even at this size, will look pristine and crisp. Thankfully I had a lot of reference pictures and models online to base my model on, so that really helped in seeing how each part should look on her. Still, this took me 2 weeks to make, it was a lot! The unfold alone took me 3 days to finish, because of all the complex parts and limited space on the A4 pages they will be printed on. It was rough! But I persevered and the end result is simply stunning to look at. Love it (:

********************************************

The papercraft is unfolded to a height of 50 cm and it has 70 pages to print out.

It consists of a base naked 3D model of Kasumizawa Miyu, and separate add-ons: the blouse, the skirt, the shoes, the panties, optional white stockings, her headgear and tactical gear, the riffle, optional gloved hands, and the stand with a trash can, a sparrow, her water jug, and a lot of 2D leaves.

Each part of the body is separate, as are the optional add-on items, because she is meant to have interchangeable parts to put on or off with a magnetic system that is added in the assembly process. The body is therefore divided into: the head with the hair, her 2 arms, the torso, her 2 legs and 2 feet.

**********************

This IS meant for more experienced and patient papercrafters, since the pose does demand you have to fill out her right leg for her to stand firmly, because the left leg is just tapping on the floor. But nothing too hard, since you have the PDO file with the preview of it to help you in any case.

*************

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

****************************************

I hope you like her and if you have your very own idea of a papercraft commission you want to make, message me on any of my sites anytime!

Enjoy and happy crafting~

Ladybug (Miraculous Ladybug) built papercraft

Ladybug (Miraculous Ladybug) built papercraft

I made the Miraculous Lady bug papercraft template some time ago:

https://www.deviantart.com/antyyy/art/Ladybug-Miraculous-Ladybug-papercraft-1235087048

And now it’s time for the assembly preview and tips.

***************************************

ASSEMBLY TIPS:

With any of my papercrafts, you can divide the assembly into separate parts: the head with the neck, the 2 3D hair tails, the arms, the upper torso and the legs with the butt.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair, the back hair and you close. Then you need to assemble the 3D hair tails separately and best to set them aside for last later on.

Next, you can separately build the 2 arms and the 2 hands, with either the 2D or 3D version (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the first few rows of the torso. You glue now this on the head and neck part you did before, then glue on the arms in the holes and build the torso till the belly. Only when this is done, glue in the 2 hands at the right angle inside the arms and that’s done.

Next step is to make the legs. You do this part by assembling the legs from bottom to top and finish with the buttocks part. Then glue all the leg part inside the belly part and it's done. Both parts are rounded in the belly part, so they fit together perfectly and this way, you can easily make the legs and the upper torso in separate phases, so they hold together better. Pro tip: I also suggest adding some weights inside the boots to make her stand nicely.

All that is left is to add the add-ons, the 2D bows and ears, the simple 3D compact in her hand, and glue on the 2D hair tails inside the holes in the head to finish it.

*NOTE: The preview was made with the 2D hand options, but the template comes with both 2D and 3D hand options.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/1172eb3db0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like her and do make some papercrafts or 2 yourselves when you get the time. They are so much fun!

Enjoy and happy crafting~

D Compose (Inhumanoids) papercraft commission

D Compose (Inhumanoids) papercraft commission

Who remembers the cartoon Inhumanoids? Well, I sure as hell don't XD I can't be watching all the 80s and 90s cartoons and anime from way back, but looking back it does look like one of those awesome old action animations I would love to watch everyday. Getting these kind of commissions makes me re-discover some of these old gems and reminiscence about the good ol' golden age of animation. Just look up the cartoon and you'll see for yourself, it's an awesome piece of cartoon history!

Well, as a commission I can share this time is one the main antagonists of the story, called „D'Compose“. The name alone is such a funny joke in itself XD

***********

The commissioner wanted a life size papercraft figure of him (well, not really life size but suuuuper big non-the-less). So, the papercraft is unfolded to 2 meters height and has I don't even know how many pages to print out, since the one assembling these in the end has his own process of making them with special reinforced paper, etc.

The main features here would be his crocodile-dinosaur shaped skull with red eyes and red teeth, and his ribcage with his rotting insides looking out of them! A real nasty piece of work, half-rotten and his skin sagging and oozing and melting away, such as the esthetic of all the older cartoon villains was! And I love it XD

**********************

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

************

Look forward to the commissioner making this scary guy into a huge figure for his end-of-the-year celebration! He always posts the previews on his page when finishing them and posts them on DA as well!! Can't wait to see it.

Enjoy and happy crafting~

Coco (Tongari Boushi no Atelier) papercraft

Coco (Tongari Boushi no Atelier) papercraft

Finally!! FINALLY! It is here! The long-awaited manga masterpiece made into an anime: “ Tongari Boushi no Atelier” or translated into “Witch Hat Atelier”.

Whoever read it already knows the core feature of this manga are the amazing and gorgeous illustrations, alongside a really unique and interesting story and fresh characters, of course. And the anime absolutely delivers this! I am in love with it so far and I had to make our main protagonist into a papercraft as well and do it justice!

***********

The papercraft is unfolded to 21 cm and has 4 pages to print (1 of them being a double-sided print). It consists of a 3D model of Coco, with all of her clothing add-ons.

The papercraft is made out of a 3D model of Coco, a separate 2D hat and coat (with a double-sided print page so the inner side of the coat is also colored and not white) and optional 2D or 3D hands.

The white under-dress is all modeled, so you can make her with the white dress only, or the optionally add her coat and hat on. *Pro tip for assembly: The coat fits on her shoulders directly, so just put a dollop of glue on the inner sides of the shoulders of the coat and fixate it to the main body to make it hold.

**********************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/cae3878dd9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

************

I hope you'll enjoy this adventure anime as much as I am and you HAVE TO read the manga as well! One of the really good ones, trust me (:

Enjoy and happy crafting~

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck + the fluff on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 front and 2 back feet separately. Make the 3D tail as well, since you can just attach it later on.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 back feet you made before and build the torso around those and when you put together the hole for the tail, attach that inside it first. Then you can glue on the front holes for the front legs and glue those 2 inside.

Now, before you do anything else: glue the tail inside the torso by adding extra stripes of tape inside the tail and torso where its glued together, because it can snap off very easily and you need to reinforce that part. Also, because it’s in a sitting pose, you don’t need to put in extra weights, since it sits on its own just fine.

When the whole torso is done, you can glue the head onto the torso where the frills/fur is.

At the end, you glue on the various bows and flowers on it and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Eevee & Pikachu, since they are meant as a set and fit together in size as well. You can find Pokepark Pikachu here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 feet you made before and build the torso around and upwards. Once you come to the holes for the arms, also glue those inside.

Now, before you do anything else 2 things to do: 1. glue the tail inside the torso by making an incision at the back and gluing it with tape on the inside. If you did as I did, you’ll be able to move the tail with the wire that way as well. 2. You put some weights inside the torso to make the Pikachu stand better (Pro tip: I always use small pebbles, since they are small to fit inside any holes you have and also heavy enough to make it heavier to stand. They are also light enough at the same time to not damage the paper when you do put them in.

When the whole torso is done, make the sleeveless jacket and put it around his arms and then glue it with a few dots at the front to make it hold its place. Now you can glue the head onto the torso where the frills are.

At the end, you glue on the various bows and flowers on it and glue on the hat as well and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Pikachu & Eevee, since they are meant as a set and fit together in size as well. You can find Pokepark Eevee here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Ufolett (Fakemon) FREE built papercraft

Ufolett (Fakemon) FREE built papercraft

Already released the FREE template of this cutie here:

https://www.deviantart.com/antyyy/art/Ufolett-Fakemon-FREE-papercraft-1266292137

And now you can see the assembly preview and tips of the build as well.

Let me also state again that it was apparently first created by »PaulDrawsArt« and I later found the 3D animation of »MrFrtc« on Reddit. So, I took those ideas and made a OC papercraft version of Ufolett in its normal and shiny form.  

**************

ASSEMBLY TIPS:

Really nice and easy from top to bottom, as with any of my papercrafts.

Start by making either the 2D or 3D antenna (I made the 2D version here, but both are included) and build the head around it. Then make the UFO part of it around the head part till you only have the bottom piece and the 3 half-round lights left.

Make each of the 3 lights separately and then glue them on the last bottom piece of the UFO. Once you have that, close the whole papercraft with that bottom part, nice any slowly, each flap separately, so it holds nice and looks neatly. Done.

Pro tip 1: I also used some thin thread to hang it from my shelf so it can “float” and it looks really fun that way :) UFOs are supposed to float and fly, so make it fly!

Pro tip 2: Papercrafts are not to be rushed. The more time you spend on gluing a flap on, the neater the end result will be and it always shows. Take your time and do it right the first time. Even if the glue happens to dry and you didn’t glue it on, no worries, just put some more glue on it and go from there. The gluing part can always wait, once it’s glued on you can’t fix it anymore.

*NOTE: The papercraft preview is only of the normal colored Ufolett papercraft, the template also includes the shiny version.

******************************

***This is a FREE papercraft that you can download for free on my Patreon page: www.patreon.com/antyyyspapercr….

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

**************

Hope you like the design. Download it on my Patreon page. Enjoy and happy crafting~

Chikorita house papercraft

Chikorita house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 19 cm heigh with 14 pages to print out.

It consists of a mystery dungeon diorama of the Chikorita grass starter house, including the in-game references of the house interior as exterior + a simple Chikorita model with its scarf. It has all the basic add-ons in the house as around the garden, including the Chikorita mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/f1cfc780d4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Guam Stage-Setting Charmer (Azur Lane) papercraft

Guam Stage-Setting Charmer (Azur Lane) papercraft

Another Azur Lane papercraft commission I can share the preview of. This is the character “Guam” in her newest “Guam Stage-Setting Charmer” skin update for the game.

The game itself doesn’t use any 3D models like this, so it was all referenced on the illustration and PVC figure of her.

********************** 

The papercraft itself is unfolded to 27 cm and has 9 pages to print out.

It consists of a 3D model of the naked Guam, and then you have an optional add-on corset suit to fit her, optional stocking holders, the hat with bunny ears, the mic stand with the 3D stand and all that jazz. She is also made in a way the boob section can be removed from the main body and the commissioner will use magnets to make it exchangeable. There are the normal naked boobs for a pose without the corset, and then you have the corset pressed boobs that are made to fit the clothes on her.

**************************************** 

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

********************** 

Hope you like the cutie. All relevant parts of the papercraft have been censored, so it’s up to the commissioner to share the finished pictures of the assembly, if they choose to do so.

Enjoy and happy crafting~

Gecqua (Pokemon WW) built papercraft

Gecqua (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed water starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Gecqua-Pokemon-WW-papercraft-1304593864

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the snout first, and build the eyes around it. Glue on the rest of the head, till you have the whole head. Add the 2D eyelashes on its eyes (or do this at the end).

Next, start making the front torso part and glue it on the head, making sure to additionally put in some tape from the inside to make it hold better and that it doesn’t snap off, because the neck is very thin.

When you have the first half of the torso, set this aside and make the 4 3D legs and the 3D tail all separately first.

When you have those, glue the first 2 front feet inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back legs and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts and you are done.

The legs are thin, but because of the pose it doesn’t need any weights inside the legs because the head balances the whole figure, so it should be fine without them.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2d836afe6a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pombon (Pokemon WW) built papercraft

Pombon (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed fire starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Pombon-Pokemon-WW-papercraft-1304595547

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head, leave the hole for the snout and build the whole front part of the head. Now build the snout part separately and glue it inside the hole, so you can center it nice and smooth. Add the 2 small 2D teeth and tounge and glue on the front fur parts on as well.

Next, start making the back side of the neck with the back side of the fur parts. Glue the fur parts together, so the fur in the back and the front is touching.

When you have the first half of the body, set it aside and make the 4 3D paws and the 3D tail all separately first.

When you have those, glue the first 2 front paws inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back paws and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts (Pro tip: Put some weights inside through the feet holes at the end at the back, if you want to make it stand better. It stands on its own, since 3 of his paws are on the bottom, but it can stand better that way) and you are done.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/545e777ad3

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Rumi (KPop Demon Hunters) built papercraft

Rumi (KPop Demon Hunters) built papercraft

Already released the template of her here:

https://www.deviantart.com/antyyy/art/Rumi-KPop-Demon-Hunters-papercraft-1302609636

So now you get the assembly tips and the preview, so let’s go!

*************************

With any of my papercrafts, you can divide the assembly into separate parts: the head with the neck, the arms, the upper torso with the pants, the legs, the boots, and the 3D sword and jacket.

If we start with the head, you assemble the face and neck first. Then the simplest way is to make the braid separately (I made the 2D braid here, but you also have the full 3D version of it). When you have the whole braid done, slide the braid inside the hole in the head for the braid with glue on the flaps of the braid, to just close it like a lid and press a bit, till the glue is try. With this, the braid should hold and the head is done. You can also glue on the 2D ears on (and the hair pins if you are making the other version).

Next you can separately build the 2 hands, with either the 2D or 3D version (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the first few rows of the torso till you make the whole torso part with the belly. When you have this, glue the second stripe for the pants part on the torso and build the remaining parts of the pants just like that. Only at the end, glue on the first stripe of the pants on, so you hide the top flaps. The whole torso should now be done.  

Next step is to make the legs. You do this part by assembling the legs from bottom to top separately first. Then glue the legs inside the pants at the right angle.

Set aside again and make the 2 boots next. Grab the boots and glue them on the legs, by making sure they are at the right angle and the papercraft figure can stand. I also suggest *pro tip: adding some weights inside the boots and legs as well to make her stand nicely.

All that is left is to add the 3D sword and the jacket. With both jackets, you need to close it on the finished Rumi papercraft. Make the straight left sleeve separately and make the whole main jacket and right sleeve together, but do not close it completely (leave the last stripe of the jacket at the bottom open, so you can slide it on the figure). When you have this, slide the jacket on, close the last stripe and glue it on first, and then slide on the left sleeve and glue it on the jacket.

If you want to make it even simpler, you can make the Rumi papercraft with all the steps, but do not glue on the 2 separate arms on yet. Make the jacket first as a whole, slide it on the torso, and THEN put the arms inside the jacket sleeves at the end with glue (since the inside of the torso isn’t visible with the jacket anyway). Even simpler and easier and you got yourself an original KPop Rumi figurine!

*NOTE: The preview is only for the 2D braid version of the basic yellow jacket version. The bought template includes interchangeable:

- 2 skin options (the normal and the demon scar one),

- 2 hair options (a simpler 2D flat braid or a 3D braid),

- 2 hand options (simpler 2D or 3D),

- 2 separate jackets (the normal yellow one and the golden one),

- 2 pants with add-ons (normal and golden),

- and 2 boots (normal and golden).

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4cfe37e6ea

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you are a huge Rumi fan as well and love the KPop movie (: I bit late to the party, but better than never! Life is short but my to-do list is very long XD

Enjoy and happy crafting~