Otus (Owlboy) built papercraft

Otus (Owlboy) built papercraft

Another one of my built papercrafts I can show you is "Otus" from the super cute and cool game "Owlboy"! :) A must-play game if you ask me, so play it :D

 

The papercraft itself is about 25cm tall. He has a 3D body, with a 2D 2-sided cape, 2D 2-sided yellow fillers, and his 3D gem on his chest. 

As with any papercraft, I started with the head. I made the nose and made the whole face first. After that I made the hair. Since it has many spikes and all, it's a bit fiddly to make, since you have to really look on how you have to bend the paper to make it glue together. That took some time. So I was really happy to finish that after a while, since it's more fiddly than the hands. Anyway, as I finished the hair, I glued that on the face, and finished all of the head till the white neck part. So the first step was finished. 

Now since Otus has a 2D 2-sided cape that can be attached at his neck part, I had to make the cape next. So you just glued that together with the parts, and glued the one part that has flaps on his neck. So I has his head and cape. After I had that, I decided to make the body part in 2 parts, the upper torso and the legs, since I wanted to make it easier for me to glue the torso really tight together at the neck part with the cape. Therefore I made both hands and arms first (and these hands are pretty simple, compared to others, since the fingers are just normal 4-sided cuboids). After I had the hands I made the upper torso part and glued it together, so I had the hole for the neck and the hole at the bottom where the legs are made, to make it easier to glue on the head. So, I glued that easy as pie thanks to the bottom hole on the head and cape and 2/3 of the craft were finished. 

All that was left were the legs. I made those attaching each part of them on the already built parts, since I wanted it to hold together really tight at the hips as well. It's a bit fiddly because of the cape part, but it's duable. If you want, you can also sepparately make the head and body part and then glue them together with the cape, as you prefer. But, as said, I decided to make it on the arm part, and as you finish at the feet, you can close them at the soles, like I normally do. And there you go! All that was left was to glue the 2D 2-sided accessories on him, such as the yellow fillers, the "moustaches" and his 3D gem (which is just a easy cube craft). And there you go, a finished Owlboy all for yourself :)

For anybody wanting to know more info on my template, you got it here: 

https://www.deviantart.com/antyyy/art/Otus-Owlboy-papercraft-810975470

Enjoy and happy crafting~

 
***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Darkrai (Pokemon) papercraft commission

Darkrai (Pokemon) papercraft commission

Time for another papercraft commission I did a while back and I can show you all :) For this one, I made the legendary Pokemon Darkrai, with included stand and all.

 

The papercraft is 16 pages long and 30 cm big, including the stand. It consits of a 3D Darkrai, which is based off the original Pokemon from the game "Sun & Moon", and has the normal as well as the shiny texture of it's body. And since Darkrai floats all the time and the commissioner didn't want it to have legs, I made a special 3D stand, that you can put him on and display it like that. The black stand is based off his dark aura attack, and also has 3 waves of his attack aura, that are just glued on the black stand collumn and are basic 2D 2-sided forms. 

All in all it's a pretty detailed Pokemon papercraft, some smaller parts are included, but for all the pain in making it, it look so much better and original at the end of it all XD so it's worth it, if you ask me, that's why I wanted to keep as much of the introcate small details of it's form as much as I could, without making it too unnecesairily complicated to glue together. 

I do hope you like it, and I hope even more that the commissioner will make it soon, so I can share the finished pictures of the craft with all of you :)

Happy crafting~

   
***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433***

Hilda and Twig built papercraft

Hilda and Twig built papercraft

It's advent time people, since it's December as of yesterday :D well at least the chocolate advent thingys can get slowly eaten now, since I love them so much :D I always buy myself one every year to get hyped for Christmas....... ANYWAY, since it's the beginning of a new month, I decided to start it with some of my new built papercrafts, that you maybe seen in the preview for my "Antyyy's Papercraft borthday celebration thing", or maybe you didn't :D No matter what, I wanted to finally release those too, so here you are, one of the cutest cartoons I have watched this year, my very own "Hilda & Twig" built papercraft from the books, comics and lastly Netflix series "Hilda"!

The papercraft template consists of 2 different crafts, so I decided to make Hilda first, since she is a bit trickyer to make, with all of the fingers, and the slender legs etc. I made her black beret hat first, since it's just a 3D accessory, which is then just pun or her (or you can glue it on her head if you want). I then proceeeded to make her 3D hair and then the head to her neck part. Then I added the 2D 2-sided hair parts for a better view of it all. Next I made her small fingers (which are still btw easier to make than most humanoid papercrafts, since they are just blocks to put thogether) and made my way to make her upper torso and her dress. After I had this, I put together the head part and the torso part. And at the end of that, I glued and built the yellow scarf around her neck, since you can't put it on in any other phase of the built. You can make your life simple, by building the 2 horizontal parts of the scarf together, and just at the last step, when you have to glue it together vertically so it holds, you put it around the neck and glue it on Hilda herself. And after that you put the 2D 2-sided scarf part that is hanging from the scarf neck part on, so it looks nice and smooth :)

Then, as I said many times in my papercraft builds, since she has a dress and it is 2-sided, you can make the feet sepparate and just glue them on last at the hips, to make the build nice and simple, and that's just what I did here. I built the leg part sepparately, and filled the big red boots of hers with sand (which I always like to use in crafts, since it's so handy to use for me and fills out the whole inside part in a jiffy, so you should try it to if you have a craft that you need to fill out so it can stand better). After I got the leg part done, I just glued it together with the upper part of her already built body, at her hips, and tadaa, she was finished and standing like she should :D

Next, I made Twig, since they are a double package deal. So I made him from top to bottom, which I always prefer to do, since closing at the bottom or back parts it always more handy, since you normally don't see it when you put a papercraft to be displayed somewhere, so it's the best sollution for it, just in case you jack-up a line or 2 XD you never know. Anway, I made the ears and then connected them to the snout and the rest of the head. After I had the head, I glued the 2-sided 2D antlers on the head (I made 2 small incisions with a exacto knife, where I wanted the antlers to be, so I could put a small portion of them in the holes and flip them over from the inside, so I could glue them on the head from the inside - it looks way better and you don't have the folded line of the anters showing out of the surface, which makes it more neat and pretty to look at). After I made all 4 legs of his separately, I slowly connected one after another on the head and torso, first the front legs, then the back legs. After I almost had the torso part with the head finished, I made the tail (I never close crafts at the tail part, since in my experinece it never looks good, so I always close a craft at the bottom, if I can). After I made the tail, I had to glue that on the torso of the deerfox, which is also a bit fiddly, since it's smaller than Hilda. And aftert that was done, all that was left to do was to glue the bottom part at the tail together, and it was finished.

Of course, I was so brave and wise to not fill the deerfox with sand, like I did with Hilda, because I was 100% sure it would be able to stand on 3 legs. BUT I WAS WRONG XD So I try to fill in the 3 standing legs of the craft yourself, because he tipps over at the front part, since the head is so big. So I had to put a small rock under his lifted hoove for it to stand, but it still looks original and cute XD

 

For those who are interested in the template, you can find the info here:

https://www.deviantart.com/antyyy/art/Hilda-and-Twig-papercraft-797026884


Hope you like the papercraft and happy crafting everybody~


***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***