Clefable Poke ball (Pokemon) papercraft

Clefable Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Clefable Poke ball design papercraft box. It is unfolded to 17 cm (12 cm of the actual Poke ball height) and has 5 pages to print out (4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c10ec275bb

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Poke ball (Pokemon) papercraft

Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Poke ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9b0341f0b7

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Cat monitor sitter built papercraft

Cat monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will:

https://www.deviantart.com/antyyy/art/Cat-monitor-sitter-papercraft-954819755

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The preview pictures made only include 2 of the 3 colors that are included in the pack. You have the brown, the white and the black colors that you can choose or build all 3 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

ko-fi.com/s/2b479dfce2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Sora Biyomon pajamas (Digimon) papercraft

Sora Biyomon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Sora in her Biyomon (Piyomon) pajamas.

*********************

The papercraft is unfolded to a height of 21 cm and has 5 pages to print out. It consists of 3D version of Sora in her Digimon pajamas. It has a 3D head with 3D hair parts, 2D 2-sided ears, a 3D body with 3D paws and feet (with a 2D tail), and a 2D hood with 2D feathers and a 2D 2-sided crest.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3c8c209ed8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case. Enjoy and happy crafting~

Sam (Trick 'r Treat) low poly wall mount commission

Sam (Trick 'r Treat) low poly wall mount commission

Something special to share this time. I rarely make low poly papercrafts, but this one was for the special little character called Sam from the movie Trick 'r Treat. I really liked that movie and it stuck in my head, so I thought it would be a great tribute to the movie to make a wall mount of him for a commission, so why not.

***************

The papercraft is really simply made, all parts are low poly and colored in 1 color to resemble the low poly papercrafts. It is unfolded to 50 cm height and has 22 pages to print out. It is made out of a 3D head with 3D buttons for his eyes and a 3D torso with 1 arm sticking out with his sucker (that is a detachable 3D item) and the other arm tucked away. The backside is completely flat, so you can hang him on a wall. The papercraft is deliberately missing the seams for his mouth and the rope around his neck, because the commissioner wanted to make those parts with actual rope.

******************************

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

***************

I hope the commissioner shares some pictures when the wall mount will be finished, so we can see how cool it will look like assembled.

In the meantime, enjoy and happy crafting~

Bananya and Baby Sweet built papercraft

Bananya and Baby Sweet built papercraft

Already showed you my newest Bananya & Baby Sweet papercraft I made for the new mini-series and now here is the assembly along with building tips, so let's go-go!

*********************************************

ASSEMBLY TIPS:

These bananyas are best built in 2 separate parts, the lower banana part and the upper cat part with the peels.

Start by making the banana bottom and glue that best from bottom to top, so you have the open top at the end to make it easier.

Set that aside and make the cat part. Best to make this is to build the 2 ears first, since they are the smallest parts, and then glue on the head around the 2 ears to the belly part. There, you glue on the simple 2D 2-sided banana peels on the inside of the cat body.

Since you have the 2 parts, you just put glue on the flaps of the banana bottom you made and slide that inside the cat body at the right angle and let the glue set. And at the end, you can add the 2D paws and the star on.

You also have the optional 2 stands for them you can also assemble to put them inside, and it doesn’t need any extra weight inside to hold, but I still suggest putting some inside when you close the stand, just to make it hold the big bananya better.

And that’s about it. A pretty simple craft and both of them are made the same way. The only small part are the little cat ears, so take time doing those and you are good to go.

******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/80c9739c7e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

******************

I hope you like the cuties and you give the short anime a watch as well :) they are super adorable and easy to watch :3

Do enjoy and happy crafting~

CatBurger (Simple version) OC built papercraft

CatBurger (Simple version) OC built papercraft

Already released my template of the so-called Super Simple CatBurger build-your-own-burger papercraft:

https://www.deviantart.com/antyyy/art/CatBurger-Simple-version-OC-papercraft-1095152087

and now I assembled it so you can see the preview pics of it as well :)

*********************************************************

So, what is this all about? As the name “Super simple papercrafts” suggests, it is a project of really simple papercrafts I make. Since I saw that many people are somewhat intimidated by my intricate designs and overall papercraft really, I wanted to show that it’s not the case and that I wanted to make an effort to make papercrafts available really for any kind of papercrafter, be it beginner, advanced or pro. I decided to address the issue and show that anybody can make papercrafts and therefore designed some fun crafts that REALLY ANYBODY CAN MAKE, super simple and really fast. But most of all, fun!

These papercrafts are simple in design regarding how many pieces there are, they are unfolded a bit bigger to make it simpler to assemble them, they have more detached (2D) pieces that you just make and glue on, and still look super sweet and adorable so anybody will want to make them.

You can find all of the “Simple Papercrafts” I designed in my folder:

https://www.deviantart.com/antyyy/gallery/75506959/simple-papercrafts

*******************************

ASSEMBLY TIPS:

Most parts are 2D anyway, so the other 3D parts, like the patty, the cucumbers, are really made the same way: take one side of the craft, glue the belt part with the flaps on the flat 2D side and then simply close it with the other flap part by putting glue on the left flaps. You basically glue it together like a box.

For the 2 buns for CatBurger, the upper head part you start by making the 2 ears and built it from top to bottom and at the end, you close it with the grilled bottom part. The bottom bun part you make by first gluing the bottom grill part to the first stripe and at the end you close it with the flat part. And you glue on the 2D 2-sided tail on last.

*********************************************************

All of the parts are OPTIONAL and you can choose whatever ones to make your own CatBurger papercraft. And you can re-print them out to make even more, if you like.

Also, all of the 3D optional ingredients can be simply turned into 2D flat parts, by cutting away the middle stripe part, if you choose to make your burger even simpler.

The only real challenge to make here is to choose what ingredients to use in this. And if you can’t choose, why not make 2 or 3 different versions of it, each with different parts inside :)

*******************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/be83de42a0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts ***

*********************************************************

Hope you like the cutie and you don’t get too hungry watching or assembling it XD

Enjoy and happy crafting~

Human Tsareena (Pokemon) built papercraft

Human Tsareena (Pokemon) built papercraft

Already released the template of the the gijinka Tsareena character:

https://www.deviantart.com/antyyy/art/Human-Tsareena-Pokemon-papercraft-1127311358

And now we have the assembled version of her as well. Let’s go to the building so I can give out some tips.

******************* 

ASSEMBLY TIPS:

With any of my papercrafts, you can divide the assembly into separate parts: the head with the neck and the pink neckpiece, the 2D hair tail, the arms, the upper torso with the fluffy dress, the legs with the butt, the boots, and the various 3D and 2D add-ons.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair, the back hair and you close it with the 3D hair part on the top that is an attachment to glue on the hair tail. Then you need to assemble the 2D hair tail separately and leave that for later.

Next you can separately build the 2 arms, with either the 2D or 3D hands (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the first few rows of the torso and the pink neckpiece. You glue now this on the head and neck part you did before, then glue on the 2 white sleeves inside the arm holes and build the frilly dress to the end. Only when this is done, glue in the 2 arms at the right angle inside and that’s done.

Now that you have the upper torso, we come back to the hair tail. The 2D tail is glued on the attachment on the top head. Simply put glue on the inner side of the tail and slap it on the stand at the right angle. Additionally, to that, you can reinforce the tail from the inside by taping in wire inside. This way, the tail will hold 200% and you don’t need to worry about attaching it in the beginning, since it would be in the way.

Next step is to make the legs. You do this part by assembling the legs from bottom to top and finish with the buttocks part. And when you have this part done, glue the legs on the pre-made separate boots at the right angle. Then glue all the leg part inside the dress part again and the 3D figure is done. I also suggest adding some weights inside the boots to make her stand nicely.

All that is left is to add the add-ons, the 3D crown and the long eyelashes and broches and glue them in the right places.

I really like how the 2D eyelashes came out and I will definitely try to make the same thing in other papercrafts from now on. It gives the eyes a nice 3D look and volume.

************************************** 

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/5effec3ced

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

******************* 

I hope you have fun assembling it as much as I did :) Happy crafting~

Human Tsareena (Pokemon) papercraft

Human Tsareena (Pokemon) papercraft

Saw some humanoid Pokemon illustrations, so I got the inspiration to make a somewhat different Pokemon, the grass type Tsareens into a human Pokemon papercraft or "gijinka" as they are called in Japanese. And here she is.

******************************************************

The papercraft itself is unfolded to 22 cm and has 5 pages to print out. It consists of a 3D model of the humanoid Tsareena OC, as well some add-ons that are simply glued on to make the parts look cute.

The model itself also has optional simpler 2D hands to make the assembly easy and fast, or the 3D option. The hair in the back is 2D 2-sided and is simply glued on the top of the head, so it’s also easy to make.

 It also would need to be additionally weight-down with some weights added in the legs, because of the somewhat tilted leg pose, but nothing hard to do. Just put in some pebbles when you close the leg part and you are good to go, or even add in magnets in the shoes to make her stick to metal surfaces, if you feel like it.

*************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/5effec3ced

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*****************

 Hope you like her and happy crafting~

Bunny monitor sitter built papercraft

Bunny monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will.

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The papercraft includes all 3 colors shown. You have the brown, the white and the black colors that you can choose or build all 3 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9c0f628dab

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Bunny monitor sitter papercraft

Bunny monitor sitter papercraft

Decided to make a series of so-called “monitor-sitter” papercraft toys. What this means is that they are basically figures that you can wedge on your laptop or PC screen and have them there for decoration or moral support, if you will.

Really simple yet effectively textured papercraft models of different animals, that are smaller in size and fit a slim PC screen. Alternatively, you can also put them on any book cover, on a glass, a box edge, on a pencil case, etc., to make your room a bit more cheerful and fun.

***********

This one is a bunny design that comes in 3 different designs/colors: white, brown and black. The template is 12 cm small and has 1 page to print for each color (and all 3 colors are included in the premium template, of course). The design of the craft itself is pretty simple, since it’s so small, and you got the blank PDO included for the assembly, so no worries about that.

******************************* 

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9c0f628dab

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

 

Dog monitor sitter built papercraft

Dog monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will:

https://www.deviantart.com/antyyy/art/Dog-monitor-sitter-papercraft-960660974

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The preview pictures made only include 2 of the 4 colors that are included in the pack. You have the light brown, the gray, the black and the red-brownish colors that you can choose or build all 4 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

ko-fi.com/s/39971a9ae4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Ayase Momo (DanDaDan) built papercraft

Ayase Momo (DanDaDan) built papercraft

Already posted my Ayase papercraft template:

https://www.deviantart.com/antyyy/art/Ayase-Momo-DanDaDan-papercraft-1110423784

And now it’s time to assemble her and give you some pro-tips on how to make life simpler for yourself when doing these. Let’s go.

**********************************************************

ASSEMBLY TIPS:

 With any of my papercrafts, you can divide the assembly into separate parts: the head with the hair, the 2 arms, the pink pullover with the sleeves, the skirt and the legs.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair and lastly close it with the back hair. After this, you can glue on the 2D head parts.

Next you can separately build the 2 arms, with either the 2D or 3D hands (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the 2 pink sleeves and glue those together. When you have all these parts, start gluing on the pink pullover at the neck, and when you come to the sleeve parts, glue those on. When you have the whole pullover with the sleeves done, only then press the pre-made hands inside to glue them on the right angle. And the torso is done.

Next, you make the skirt part. The only part that needs pre-bending is the last skirt part, so put those folds in there to make it look nice a frilly and then glue the skirt together with the inner torso part.

Next step is to make the legs. You do this part by assembling the legs from bottom to top and finish with the buttocks part. This means, build the shoes first glue the leg from there upwards till you come to the butt.

And before anything, fill up the legs with some weights here, to make her really stand firmly (*Pro-tip: I always suggest smaller pebbles, since they are small enough to fit and heavy enough to help with the weight as well, without rupturing the paper itself).

All that is left is to do is to glue these parts now together. Glue the skirt inside the torso first and the glue on the legs part inside the skirt, making sure to glue them at the right angle, so the figure can stand nicely. And it's finished.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/91749aeb4d

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts ***

*********************

Enjoy and happy crafting~

Mimi Palmon pajamas (Digimon) papercraft

Mimi Palmon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Mimi in her Palmon pajamas.

*********************

The papercraft is unfolded to a height of 26 cm and has 7 pages to print out. It consists of 3D version of Mimi in her Digimon pajamas. It has a 3D head with 2D hair parts, 2D 2-sided ears, a 3D body with 3D paws and feet, a 2D hood with 2D ears, her 2D hat, and a 2D 2-sided flower on her head.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/f7fe0dcb66

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case.

Enjoy and happy crafting~

Bear monitor sitter built papercraft

Bear monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will:

https://www.deviantart.com/antyyy/art/Bear-monitor-sitter-papercraft-956843700

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

*******************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The preview pictures made only include 2 of the 3 designs that are included in the pack. You have the panda, the polar bear and the brown bear design that you can choose or build all 3 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

ko-fi.com/s/d998f495c9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Xatu (Pokemon) redesign papercraft

Xatu (Pokemon) redesign papercraft

Fakemon are a really nice inspirational source for many papercraft ideas, including this one. This is a redesigned Pokemon of Xatu, but in a more Ainu-esque design, as it turned out. I really like the color combination and it’s a simple OC craft to make.

***************************

The papercraft itself is unfolded to 13 cm and has 3 pages to print. It consists of a basic 3D Xatu model, and his 2D add-on wings, tail, bandana and dress. The hardest part would be the legs, since they have some small parts to glue together, but all in all a pretty simple, basic craft. As with all of my crafts, the PDO is always included, so you can see the 3D model and how to assemble it best all in the file itself.

******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/31bccdf151

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

***************************

I hope you enjoy the OC Pokemon and that people make some of their own versions as well. Pokemon is a vast universe of ideas that can be re-shaped and designed anyway you want

Do enjoy and happy crafting~

Takeru Patamon pajamas (Digimon) papercraft

Takeru Patamon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Takeru (T.K.) in his Patamon pajamas.

*********************

The papercraft is unfolded to a height of 21 cm and has 4 pages to print out. It consists of 3D version of Takeru in his Digimon pajamas. It has a 3D head with 3D wing stands and 2D wings, 2D 2-sided ears, a 3D body with 3D paws, feet and a tail, a 2D hood, and a 2D 2-sided tail with 2D fur.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

Also, the wings on the hood are made with 3D and 2D parts. Once you assemble the 3D wing stands, you then just glue on the 2D wings on there as is, without flaps or anything.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/429c66237f

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case.

Enjoy and happy crafting~

Turbo Babaa (DanDaDan) built papercraft

Turbo Babaa (DanDaDan) built papercraft

Already released the template of it:

https://www.deviantart.com/antyyy/art/Turbo-Babaa-DanDaDan-papercraft-1118115214

Now, the assembly :)

*********************

ASSEMBLY TIPS:

As with all of my papercrafts, you built it from top to bottom.

Start by making the 2 ears and then the 2 arms, legs and the tail separately.

Then, take the ears and start assembling the head till you reach the neck. Glue the red stripe on the head and then glue on both green bandanas inside the neck part and set aside.

Now, take the 2 arms and start assembling the body. When you make the whole body, just glue the legs and the tail part inside the body to make the build really simple.

In the end, glue on the body together with the head and glue on the 2D bell and sign. And it’s done and done :3

*NOTE: The papercraft template has 7 different facial expressions you can choose from, this is just 1 of them.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/b0c7f41100

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like it and you enjoy this crazy new anime as well.

Enjoy and happy crafting~

Mualani (Genshin Impact) papercraft

Mualani (Genshin Impact) papercraft

Not a fan of gacha games at all (I hate late-stage capitalism), but DAMN, this design blew my mind when it came out. She looks sooo cool and sooo gorgeous, and you really don’t get a lot of darker skinned characters in anime/games, so she is so precious I want to hold her and protect her and hug her and never let go ;_; my new Genshin waifu called “Mualani”!

*********************

The papercraft is unfolded to a height of 26 cm and has 5 pages to print out. It consists of 3D version of Mualani with her various 2D and 3D add-ons.

The papercraft has an optional 3D or 2D versions of the hands. It looks complicated, but you have so many add-ons on here that its’s super easy.

You make the base naked body of her (nipples included and pants only) and then you just add all of the bracelets, bows, skirts and stuff. The hair is made with the 3D head and then just the base of the braids is 3D and then the rest of it is all 2D 2-sided and simple to glue on. Her maracas are also 3D as well as the little white seal bracelet, but it’s really easy to make, since I wanted all of the various items on her to be really simply designed.

The whole model is referenced off the official 3D model from the game, so all of the drawn details are from the game.

I did NOT include the weird ugly pink pufferfish on her back, because I hate it with all of my heart XD So, F it, the pufferfish is a grave mistake on her else flawless and adorable design! So, I fixed that small mistake in my papercraft :)

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c36821e9e4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like my new waifu. Enjoy and happy crafting~

Bananya and Baby Sweet papercraft

Bananya and Baby Sweet papercraft

As you maybe know, waaay back I released the first few Bananya characters from the anime as simple crafts I made to assemble for FREE:

https://www.deviantart.com/antyyy/art/Bananya-Bananya-built-papercraft-849359505

But because they are simple versions and stuff I made waaaay back, I decided to make a new version of Bananya and her new friend, since a new short anime came out. I wanted it to look more like the original now and making it a bit more complicated and detailed than the simple version, and here are the little cuties :3

******************

The papercraft is unfolded to 20 cm (including the stands) and has 5 pages to print. The craft includes both Bananya and his new fairy friend called “Baby Sweet”, which is a little baby bananya version. The Bananya papercraft is about 19 cm tall and the Baby Sweet one about 9 cm tall.

Both papercraft are pretty simple to make and the flaps of the banana are 2-sided and 2D, so you glue the flaps on the upper cat body first, and then glue on the bottom banana parts next. The paws and her star are also flat parts that you glue on just as is.

Since it is that shape, I did include 2 stands for both of them, so you can either use the stand to put them inside (which also need weights inside to hold the bananyas in place), or you can tie them to some wire or twine to hang them from your celling or shelves to make it look even better.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/80c9739c7e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts *** 

******************

I hope you like the cuties and you give the short anime a watch as well :) they are super adorable and easy to watch :3

Do enjoy and happy crafting~

Pochars complete group papercraft

Pochars papercraft

This cute little anime came out this season and I simply find the ADORABLE to die for. Just look at those fat little cheeks! So, I wanted to make some simple papercrafts out of the whole bunch and here they are :3

****************

This papercraft is unfolded to about 7 cm for each round ball animal (without the add-ons) and has 8 pages to print. It consists of the complete Pochars group of 7 animals all in all, each with their own simple 2D 2-sided add-ons, such as ears and tails.

From top left to bottom right we have: Tiger, Bear, Turtle, Elephant, Giraffe, Bunny and Whale. Each is made from a simple 3D ball and 2D add-ons, and the turtle also has a simple 2D shell on its back, which you glue on by putting glue inside the assembled shell and it fits inside the round ball body.

********************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e8903b8b3a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

*****************

The anime are 1-minute shorts, so you can give them a watch anytime on YouTube as well. Go check them out and buy the adorable merch! I needssss me to get some myself XD

Enjoy and happy crafting~

Turbo Babaa (DanDaDan) papercraft

Turbo Babaa (DanDaDan) papercraft

New anime season and new anime adaptations to watch. And the one everybody has been waiting for is a series called “DanDaDan”. A really crazy fighting anime with lovable, quirky characters, so I get it. And that is why I already did Ayase Momo:

https://www.deviantart.com/antyyy/art/Ayase-Momo-DanDaDan-papercraft-1110423784

And now we also have Turbo Babaa or Turbo Granny in her Maneki-neko captured form :)

*********************

The papercraft is unfolded to a height of 14 cm and has 3 pages to print out (2 pages with the body and the main facial expression + 3 optional pages with other facial expressions). It consists of a 3D model of Turbo-baba I did + 7 different faces.

The design/pose idea is a simple sitting Maneki-neko, simple 2D add-ons such as the bell and sign, 3D ears and paws, and then you have 7 different facial expressions I found from the manga and that you can use as the face and choose from. You can also print out the first 2 pages with the body and make all 7 different ones as well, as you wish :3

Since it is sitting, it won’t have a problem tilting over, and the only smaller parts would be the 4 paws and the tail in the back, but really simple to make all in all.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/b0c7f41100

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like it and you enjoy this crazy new anime as well.

Enjoy and happy crafting~

Happy Halloween! 2024

Happy Halloween! 2024

Happy Halloween everybody!

Hope you enjoy the best holiday of the year and have an awesome time partying :)

And of course: HAPPY CRAFTING~ from Antyyy’s Papercrafts!

***********************************

P.S.

The little cute skeleton Pikachu is my premium papercraft I made a while back, and you can find the info on it and the link for the purcahse here:

https://www.deviantart.com/antyyy/art/Skeleton-Pikachu-built-papercraft-859777908

Enjoy~

Emily (Corpse Bride) papercraft

Emily (Corpse Bride) papercraft

As this year’s Spooktober final “coup de grâce”, I present you my version of Emily from Tim Burtons classic stop-motion movie “Corpse Bride”.

****************

This papercraft is unfolded to 30 cm (about 25 cm for Emily alone without the stand) and has 17 pages to print (2 of which are double-sided prints for the inner side of the hair and the thorns, to make it look really nice). It consists of a 3D model of Emily, her 3D bouquet with 2D blue roses, a 3D stand for her, a half 3D half 2D tree, and a lot of 2D add-ons.

The smaller parts would be the high heels and the roses. The roses in the bouquet and in her veil on her head are each made out of 3 2D pieces, so you glue the parts together for 1 rose flower, so they are easy to make, just more time-consuming.

Since her overall design is quite complex to make into a papercraft, the thinner bone hands and feet are made with a simpler design, so they are not as accurate as in the cartoon, but are therefore easier to make and still look nice.

The hands are 2D, since her left arm is bones only, and it is easier to assemble that way. The hair is also mostly made out of 2D stripes, so you can additionally curl-up the paper to make it nice and wavy :)

********************************

I really love each and every movie of Tim Burton, even the ones he just works alongside with or is in collaboration in, since he has such a special esthetic that is simply horridly whimsical and filled with spooky wonder.

So I wanted to give this “lesser” known cartoon some justice and really worked hard on this little cutie :D It may not look 100% as in the stop-motion movie, but that wasn’t my plan to begin with anyway, I just wanted to do it justice and make her in a way my own papercraft work shines through.

****************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4ceb076722

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts *** 

*****************

I hope you enjoyed this years Spooktober to the fullest and I wish you a spooky and horror-filled Halloween night as well!

Enjoy and happy crafting~