Pichu (Pokemon) papercraft

Pichu (Pokemon) papercraft

What kind of a papercraft designer, that has an actual Pikachu doll papercraft in her logo for years, would I be, if I didn't finally make a pre-evolution of my favorite Pokemon Pikachu! With this said, let me introduce you to my new Pokemon papercraft: Pichu!


The papercraft is 24 cm high and has 6 pages to print. The craft is made out of a whole attached 3D model (including tail and ears), but should still be fairly easy to make. It's in his typical cheer pose, and of couse this one also comes with the shiny textures that you can see in the bottom screenshot of the preview.

I have been making Pikachu papercrafts since the beginning, also made some Raichu papercrafts, but never really though about making a Pichu one XD Should have been fairly obvious but didn't have motivation to make it, probably. But you get it now, so I hope you didn't wait for it too long XD

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

  

Hope you like it and happy crafting~

Victini (Pokemon) papercraft

Victini (Pokemon) papercraft

Showing you another papercraft post, that maybe is especially interesting for those that keep on asking about the old deleted papercrafts I had before 2017, it's Victini! It is therefore interesting because I already made a super shitty attempt of a Victini papercraft and that wasn't really good, so of course it was deleted and wasn't sold anymore. BUT, since no real lifesize Victini papercrafts are on the internet and maybe people are missing it, I decided to make another attempt and make it much better and actually buildable, so here you go XD

The craft is about 27 cm tall and has 9 pages to print. All the pieces are 3D and attached to the body, even the back wings on his butt XD So that's a fiddly part to make, else it's a normal craft to glue together. I decided to use pre-existing HD textures for it, because they were really detailed and I think it looks really nice this way. So model by me, textures are not. And it has that typical V pose that you can see on all reference pictures of the Pokemon XD becuase, well because it just has to have that pose I guess :D

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Hope you like it and happy crafting~

Bellossom (Pokemon) papercraft

Bellossom (Pokemon) papercraft

Ahhh yes, just can't get rid of these Pokemon papecrafts XD I got so many left, so I got at least material for 2 more weeks for posting everyday. In any case, we are moving on to a cutie that you can also get in the new Sword/Shield game, and that's Bellossom!

   

The craft is 20 cm tall and has 11 pages to print. It has a 3D attached model of a Bellossom, 2D 2-sided leafs that you can simply glue on the bottom hidden bulde made especially on the Bellossom body for this, as well as a 3D stand, for those who want it to be there (or you can just let it stand as is, or hang it from a wire). It also has separate 3D flowers on the head, which are also just glued on, so it looks pretty and original, and at the same time is simple enough to make. 

As you can see it also has a shiny version along with the normal colors. Made it myself again, since even the Sw/Sh textures are too crappy for me to use, and I like a clean HD visual on all of my crafts.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Hope you like it and happy crafting~

Clefairy (Pokemon) papercraft

Clefairy (Pokemon) papercraft

Let's continue the Pokemon papercrafts, lots to show still XD This one is from one of the cutest Pokemon, and I love it dearly, especially when I saw them in the 1. season Pokemon anime. They are very mysterious and aparently they are the good side of Gengar (so a legend says) and they came from outer space! (also confirmed in the anime, since they were building a spaceship XD). I presend you my take on the Pokemon Clefairy!

The papercraft itself is 15 cm tall and has a total of 6 pages to print. It consists of a 3D model, and 2 sepparate 3D wings that you glue on as whole at the back, to make it easy to build. Of course, as you can see at the bottom of the preview, it comes with the shiny version as well.

Model and texture again, made 100% by me, since the original ripped textures are useless and without any kind of shading or details. So, you get a ultra-HD textured Pokemon, of which the colors are always 100% and crisp, even if you decide to print it on A3 paper (file is unfolded for A4 paper, of course, as are all the standard papercraft files I make).

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Hope you like it and happy crafting~

Ponyta (Pokemon) papercraft

Ponyta (Pokemon) papercraft

Time for another beautiful papercraft. This time I decided to share one of my favorite shiny Pokemon forms, which I like more than the original, it is the one and only gen 1. Pokemon, Ponyta!

The papercraft itself is 25 cm tall and has 9 pages to print. It has a 3D body with 2D 2-sided flames, that you first attach to one side of the body with flaps, and then simply glue them together to close it. So it should be simple to make.

As for the model itself, of course, everything made by me, since the original textures suck too much to use XD I really don't like to use pre-made textures if I don't have, because I know how to make them HD-quality so they are really crisp no matter at what height you will print them (A4, A3, etc.). Same goes for the flame textures, since the original ripped files don't even have the flame textures as colors, only the defused ones, and you cannot get them from any game. So in any case you need to do the flames yourself in any case, so I oriented myself of the Sun/Moon model flow in the game, to make the flames the same dynamic as in the game.

I am especially proud of the dynamic pose, the lifted leg and the tilded head, the somewhat whindy torso etc, really love the pose that looks like a great dynamic figurine that they sell in Japanese Pokecenters XD Definelty the best posed and best textured Ponyta papercraft you'll find on the internet.

 

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Hope you like it and happy crafting~

     
UPDATE: 

You can also view the assembled preview of Ponyta here: 

https://www.deviantart.com/antyyy/art/Ponyta-Pokemon-built-papercraft-862015607