Clefable Poke ball (Pokemon) papercraft

Clefable Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Clefable Poke ball design papercraft box. It is unfolded to 17 cm (12 cm of the actual Poke ball height) and has 5 pages to print out (4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c10ec275bb

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Poke ball (Pokemon) papercraft

Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Poke ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9b0341f0b7

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Cat monitor sitter built papercraft

Cat monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will:

https://www.deviantart.com/antyyy/art/Cat-monitor-sitter-papercraft-954819755

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The preview pictures made only include 2 of the 3 colors that are included in the pack. You have the brown, the white and the black colors that you can choose or build all 3 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

ko-fi.com/s/2b479dfce2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Sora Biyomon pajamas (Digimon) papercraft

Sora Biyomon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Sora in her Biyomon (Piyomon) pajamas.

*********************

The papercraft is unfolded to a height of 21 cm and has 5 pages to print out. It consists of 3D version of Sora in her Digimon pajamas. It has a 3D head with 3D hair parts, 2D 2-sided ears, a 3D body with 3D paws and feet (with a 2D tail), and a 2D hood with 2D feathers and a 2D 2-sided crest.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3c8c209ed8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case. Enjoy and happy crafting~

Sam (Trick 'r Treat) low poly wall mount commission

Sam (Trick 'r Treat) low poly wall mount commission

Something special to share this time. I rarely make low poly papercrafts, but this one was for the special little character called Sam from the movie Trick 'r Treat. I really liked that movie and it stuck in my head, so I thought it would be a great tribute to the movie to make a wall mount of him for a commission, so why not.

***************

The papercraft is really simply made, all parts are low poly and colored in 1 color to resemble the low poly papercrafts. It is unfolded to 50 cm height and has 22 pages to print out. It is made out of a 3D head with 3D buttons for his eyes and a 3D torso with 1 arm sticking out with his sucker (that is a detachable 3D item) and the other arm tucked away. The backside is completely flat, so you can hang him on a wall. The papercraft is deliberately missing the seams for his mouth and the rope around his neck, because the commissioner wanted to make those parts with actual rope.

******************************

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

***************

I hope the commissioner shares some pictures when the wall mount will be finished, so we can see how cool it will look like assembled.

In the meantime, enjoy and happy crafting~

Bananya and Baby Sweet built papercraft

Bananya and Baby Sweet built papercraft

Already showed you my newest Bananya & Baby Sweet papercraft I made for the new mini-series and now here is the assembly along with building tips, so let's go-go!

*********************************************

ASSEMBLY TIPS:

These bananyas are best built in 2 separate parts, the lower banana part and the upper cat part with the peels.

Start by making the banana bottom and glue that best from bottom to top, so you have the open top at the end to make it easier.

Set that aside and make the cat part. Best to make this is to build the 2 ears first, since they are the smallest parts, and then glue on the head around the 2 ears to the belly part. There, you glue on the simple 2D 2-sided banana peels on the inside of the cat body.

Since you have the 2 parts, you just put glue on the flaps of the banana bottom you made and slide that inside the cat body at the right angle and let the glue set. And at the end, you can add the 2D paws and the star on.

You also have the optional 2 stands for them you can also assemble to put them inside, and it doesn’t need any extra weight inside to hold, but I still suggest putting some inside when you close the stand, just to make it hold the big bananya better.

And that’s about it. A pretty simple craft and both of them are made the same way. The only small part are the little cat ears, so take time doing those and you are good to go.

******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/80c9739c7e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

******************

I hope you like the cuties and you give the short anime a watch as well :) they are super adorable and easy to watch :3

Do enjoy and happy crafting~

CatBurger (Simple version) OC built papercraft

CatBurger (Simple version) OC built papercraft

Already released my template of the so-called Super Simple CatBurger build-your-own-burger papercraft:

https://www.deviantart.com/antyyy/art/CatBurger-Simple-version-OC-papercraft-1095152087

and now I assembled it so you can see the preview pics of it as well :)

*********************************************************

So, what is this all about? As the name “Super simple papercrafts” suggests, it is a project of really simple papercrafts I make. Since I saw that many people are somewhat intimidated by my intricate designs and overall papercraft really, I wanted to show that it’s not the case and that I wanted to make an effort to make papercrafts available really for any kind of papercrafter, be it beginner, advanced or pro. I decided to address the issue and show that anybody can make papercrafts and therefore designed some fun crafts that REALLY ANYBODY CAN MAKE, super simple and really fast. But most of all, fun!

These papercrafts are simple in design regarding how many pieces there are, they are unfolded a bit bigger to make it simpler to assemble them, they have more detached (2D) pieces that you just make and glue on, and still look super sweet and adorable so anybody will want to make them.

You can find all of the “Simple Papercrafts” I designed in my folder:

https://www.deviantart.com/antyyy/gallery/75506959/simple-papercrafts

*******************************

ASSEMBLY TIPS:

Most parts are 2D anyway, so the other 3D parts, like the patty, the cucumbers, are really made the same way: take one side of the craft, glue the belt part with the flaps on the flat 2D side and then simply close it with the other flap part by putting glue on the left flaps. You basically glue it together like a box.

For the 2 buns for CatBurger, the upper head part you start by making the 2 ears and built it from top to bottom and at the end, you close it with the grilled bottom part. The bottom bun part you make by first gluing the bottom grill part to the first stripe and at the end you close it with the flat part. And you glue on the 2D 2-sided tail on last.

*********************************************************

All of the parts are OPTIONAL and you can choose whatever ones to make your own CatBurger papercraft. And you can re-print them out to make even more, if you like.

Also, all of the 3D optional ingredients can be simply turned into 2D flat parts, by cutting away the middle stripe part, if you choose to make your burger even simpler.

The only real challenge to make here is to choose what ingredients to use in this. And if you can’t choose, why not make 2 or 3 different versions of it, each with different parts inside :)

*******************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/be83de42a0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts ***

*********************************************************

Hope you like the cutie and you don’t get too hungry watching or assembling it XD

Enjoy and happy crafting~

Human Tsareena (Pokemon) built papercraft

Human Tsareena (Pokemon) built papercraft

Already released the template of the the gijinka Tsareena character:

https://www.deviantart.com/antyyy/art/Human-Tsareena-Pokemon-papercraft-1127311358

And now we have the assembled version of her as well. Let’s go to the building so I can give out some tips.

******************* 

ASSEMBLY TIPS:

With any of my papercrafts, you can divide the assembly into separate parts: the head with the neck and the pink neckpiece, the 2D hair tail, the arms, the upper torso with the fluffy dress, the legs with the butt, the boots, and the various 3D and 2D add-ons.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair, the back hair and you close it with the 3D hair part on the top that is an attachment to glue on the hair tail. Then you need to assemble the 2D hair tail separately and leave that for later.

Next you can separately build the 2 arms, with either the 2D or 3D hands (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the first few rows of the torso and the pink neckpiece. You glue now this on the head and neck part you did before, then glue on the 2 white sleeves inside the arm holes and build the frilly dress to the end. Only when this is done, glue in the 2 arms at the right angle inside and that’s done.

Now that you have the upper torso, we come back to the hair tail. The 2D tail is glued on the attachment on the top head. Simply put glue on the inner side of the tail and slap it on the stand at the right angle. Additionally, to that, you can reinforce the tail from the inside by taping in wire inside. This way, the tail will hold 200% and you don’t need to worry about attaching it in the beginning, since it would be in the way.

Next step is to make the legs. You do this part by assembling the legs from bottom to top and finish with the buttocks part. And when you have this part done, glue the legs on the pre-made separate boots at the right angle. Then glue all the leg part inside the dress part again and the 3D figure is done. I also suggest adding some weights inside the boots to make her stand nicely.

All that is left is to add the add-ons, the 3D crown and the long eyelashes and broches and glue them in the right places.

I really like how the 2D eyelashes came out and I will definitely try to make the same thing in other papercrafts from now on. It gives the eyes a nice 3D look and volume.

************************************** 

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/5effec3ced

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

******************* 

I hope you have fun assembling it as much as I did :) Happy crafting~

Human Tsareena (Pokemon) papercraft

Human Tsareena (Pokemon) papercraft

Saw some humanoid Pokemon illustrations, so I got the inspiration to make a somewhat different Pokemon, the grass type Tsareens into a human Pokemon papercraft or "gijinka" as they are called in Japanese. And here she is.

******************************************************

The papercraft itself is unfolded to 22 cm and has 5 pages to print out. It consists of a 3D model of the humanoid Tsareena OC, as well some add-ons that are simply glued on to make the parts look cute.

The model itself also has optional simpler 2D hands to make the assembly easy and fast, or the 3D option. The hair in the back is 2D 2-sided and is simply glued on the top of the head, so it’s also easy to make.

 It also would need to be additionally weight-down with some weights added in the legs, because of the somewhat tilted leg pose, but nothing hard to do. Just put in some pebbles when you close the leg part and you are good to go, or even add in magnets in the shoes to make her stick to metal surfaces, if you feel like it.

*************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/5effec3ced

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*****************

 Hope you like her and happy crafting~

Bunny monitor sitter built papercraft

Bunny monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will.

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the ears first, then the head, attach the front paws, the body, the 3D tail, the back legs and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The papercraft includes all 3 colors shown. You have the brown, the white and the black colors that you can choose or build all 3 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9c0f628dab

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~