Halloween pumpkin Pikachu papercraft

Halloween pumpkin Pikachu papercraft

I got tons of work left to do with my “Under construction” status, and I am not even on 20% at the moment, since it takes so much time to edit all the PDO files and the unfolds….

BUT it’s Spooktober my friends, and I just had to do my traditional Halloween papercraft of Pikachu, in one way or another :D And here he is.

I did think about making the official Poke Center plushies, but I didn’t really like them that much. So, I did an original take on Pikachu in his pumpkin that I find super cute :D

The whole papercraft consists of 9 pages that you can print out and is unfolded to a proximate height of 15 cm. It has a separate 3D pumpkin (with an optional inner side), a separate pumpkin “lid” or hat that fits his head (with an optional inner side) with a 2D green stem on it, and a separate 3D model of Pikachu (with a 2D 2-sided tail), that fits into the pumpkin, is holding himself onto the pumpkin edge with his hands, and can be taken out, if needed.


All in all the Pikachu papercraft is very simple to make and the only small parts are the 3 toes on each of his curved feet. The pumpkin also needs to be shaped the right way, so it looks “pumpkiny”, so that is also something to take into account when assembling it, but that’s about it.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***


I got a lot of work left to do, but I do want to finish the assembly of this little cutie till the start of Halloween, so I definitely will post the assembled and built papercraft of him when I do so :)

Hope you are looking forward to and happy crafting~

Antyyy's Papercrafts - FREE papercraft downloads

Antyyy's Papercrafts - FREE papercraft downloads

Since some of you know, or don’t know, I have been slaving and working away for 1 month now to update my pages, as promised, with updated links and PDO’s etc., and I have finally managed to update all of the FREE section papercrafts I have for download :)

 

//////////////////////////////////////////////////////////////////////////////////////////

 

Since I wanted to update the page to really highlight my current work and skills, I have also removed some really old papercrafts out of my “FREE papercrafts” gallery (https://www.deviantart.com/antyyy/gallery/60188530/free-papercrafts)  that were really not up to par with my current modeling/texturing abilities and I really didn’t like anymore. But don’t fear!

All of the free ones can still be downloaded and are now available (with updated PDO files included) on my Patreon page:

https://www.patreon.com/antyyyspapercrafts

My Patreon page is regularly updated with new free papercrafts I am sharing (that everybody can download, even without an account or a subscription), as well as some premium ones that can only be downloaded there. So, check it out if you are interested ;)

And if anybody wants to additionally support me by becoming my Parton to allow me to continue working on my art and to be able to release free papercrafts for everybody, I would be very happy as well.

 

//////////////////////////////////////////////////////////////////////////////////////////

 

Else, I hope you enjoy my free papercraft templates and that I get to see a lot of newly shared assembled papercraft pictures online as well :)

Much more work and updates to do (+ so many new ideas and projects for new designs on the way), so stay tuned for more posts as always ;)

Enjoy and happy crafting~

    
***All of the papercraft seen are FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Zim (Invader Zim) FREE papercraft

Zim (Invader Zim) FREE papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) And I will be starting with the main charcter of the series, Invader Zim himself. 

 

The papercraft is 26cm tall and has 9 pages to print. It consists of a 3D model of Zim, with a 3D body as well as 2 different heads, which both fit on the body. One head is his original alien form, the other is his disguise as a human being, so you can print out the body parts 2-times and make both of them, or just make the one you like more :) 

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts

 

Hope you take a look at all of them and you like them and of course happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Rir (Invader Zim - fanmade) FREE papercraft

Rir (Invader Zim - fanmade) FREE papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) So next in line is the second made-up character from the Invader Zim fandom"Rir", the female version of the robot Gir.

 

The papercraft is 21 cm tall and has 8 pages to print. It consists of a 3D model of Rir, one being the original alien SIR unit robot form, and one being the disguise of a green/pink dog she has, which is super cute btw XD Both papercraft models are 3D and attached with all parts, also with some 2D mics, such as Gir's antenna and the dogs collar etc. The design of the character belongs to and was made up by the commissioner herself, so all credit to the commissioner regarding the design of her ;)

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts

 

Hope you take a look at all of them and of course happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Rim (Invader Zim - fanmade) FREE papercraft

Rim (Invader Zim - fanmade) FREE papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) So next in line is a made-up character from the Invader Zim fandom, "Rim", which is actually the female version of Zim himself :)

The papercraft is 26 cm tall and has 11 pages to print. It consists of a 3D model of Rim, with a 3D body as well as 2 different heads, which both fit on the body. One head is his original alien form, the other is her disguise as a human being, so you can print out the body parts 2-times and make both of them, or just make the one you like more :) She also has 2D 2-sided lashes, because she is a girl. The design of the character belongs to and was made up by the commissioner herself, so all credit to the commissioner regarding the design of her ;)

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts

 

Hope you take a look at all of them and and of course happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Gir (Invader Zim) FREE papercraft

Gir (Invader Zim) FREE papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) So next in line is the second main character of the cartoon, "Gir".

The papercraft is 21 cm tall and has 7 pages to print. It consists of a 3D model of Gir, one being his original alien SIR unit robot form, and one being the disguise of a green dog he has, which is super cute btw XD Both papercraft models are 3D and attached with all parts, also with some 2D mics, such as Gir's antenna and the dogs collar etc.

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts


Enjoy and happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Gaz (Invader Zim) FREE papercraft

Gaz (Invader Zim) FREE papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) The last papercraft of the group is "Gaz Membrane", the little sister of Dib.

The papercraft is 25 cm tall and has 7 pages to print. It consists of a 3D model of Gaz, with a 3D atached body as well as her simple made 3D skull necklace, which is just glued on with the 2D necklace thread around her shoulders. All of the hair parts are also 3D, but simple enough to make still.

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts

 

Hope you take a look at all of them and you like them and of course happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Dib (Invader Zim) FREE papercraft

Dib Membrane (Invader Zim) papercraft

Today I will be showing you the whole papercraft commission collection I have made from the cartoon "Invader Zim", because... well because it is finished and because I have so much other stuff to post that I will be posting all of them today :) Next in line is his arcenemy, the human "Dib Membrane".

The papercraft is 26 cm tall and has 7 pages to print. It consists of a 3D model of Dib, with a 3D body as well as his 2-sided coat, which you build on him so it looks super cool. 

The papercraft commission was made for the commissioner, which again allowed me to share these papercrafts to those who would like to make them. All 6 of the Invader Zim papercrafts I have made are the same heights, making them a group papercraft so they fit together as they would in the cartoon. They are pretty difficult to make, since the original characters are very slimm and have smaller appendages, so the limbs are fiddly and the feet definetly need to be reinforced and filled with a material to make them stand properly, because the commissioner for which they were made wanted them to be the same as in the cartoon. A bit of work, but nothing is impossible, especially if you love the series XD 

You can now download the file for FREE here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts

 

Hope you take a look at all of them and you like them and of course happy crafting~

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Maki chibi (Fire Force) built papercraft

Maki chibi (Fire Force) built papercraft

Time for another assembled papercraft of one of the best anime in the last few years “Enen no Shouboutai”. This time it’s the coolest and toughest girl of the 8h divison, Maki Oze, the fire witch in chibi form ;)

As with all my crafts, I always start at the head. Built the face first (with the neck) and then make your way to the back of the head with the hair and close it. Since the ponytail and the bangs are meant to be glued on the witch hat (since it’s simple to make that way and looks cute as well), we first have to build the hat on the head. Make and glue both sides of the hat visor on and once you got that, the tail and bangs can be glued on the hat according to the instructions in the PDF. Once the hair parts are firmly glued on, you can build the remaining hat tip (and close it) and at the end glue the 2D 2-sided 8th division pin on the hat. All there is left are the 2 2D 2-sided ears you glue on the right sports and the head is done.

Moving on, I made the 2 arms separately first. After you have only the arms done, glue the “stumps” inside the arms at the right angle. And after those are glued, you can glue on the simple 2D 2-sided hands on and bent/curl the fingers as you want in any pose (and don’t forget the 2D 2-sided Pusu-Pusu flame spirit that is attached to the index finger on the right) and we are done :)

When the arms are done, built the first half of the jacket with the collar. When you got that, glue the arms on the jacket and then slide the neck part (of the built head) inside the hole and glue it up from the inside. Let that part dry good, and when it does, use curled-up waste paper to bulk up that tiny neck of his to prevent it from snapping (it’s a chibi papercraft, so the necks are always the most difficult part, since they are so small and the head disproportionately big).

After that built the remaining jacket part and then move on to the legs. The legs can be assembled separately from the main body, since they fit inside the jacket and it’s easier that way, so do just that. Built the feet from the bottom upwards, first making the boots and make your way up till you reach the last part. In this phase you can fill out or add weights into the feet (if you want to be 100% sure it stands), but she stands pretty good without any help as well. And after you are happy with the feet, simply paste glue on the flaps and glue them on the body at the waste part, adjusting the right angle so she can stand, and there you go. All done.

She is pretty sturdy for a chibi papercraft, if you assemble her right. The neck is “hidden” inside the collar, making the most vulnerable part (the neck) pretty stiff, even without extra reinforcing it.

I hope you like this cutie and you’ll get some ideas to assemble a papercraft or two on your own. The template and info about the purchase can be found here:

https://www.deviantart.com/antyyy/art/Maki-chibi-Fire-Force-papercraft-888950784

As always, just sent a private note and let me know if you would like to buy it. In any case, happy crafting~ and "Latom!"

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Antyyy's Papercrafts UNDER CONSTRUCTION

Antyyy's Papercrafts UNDER CONSTRUCTION

Long overdue promises, overdue commitments to my followers, etc...

     
Therefore, I have decided to go under construction to freshen up my work, my post, my link, EVERYTHING: meaning that from 1st September till probably 31st December 2021 I will not update my sites with any new papercraft designs, to really focus on cleaning up all the files I have. Commissions are STILL OPEN and will stay open, as well as sales for anybody wanting to purcahse my papercrafts, I’ll also maybe assemble a papercraft here and there (if I’ll have time, probably not) or share public commissions, but I won’t update any new designs and releases – what I will update are my old posts that I’ll notify my watchers about in any case.

I hope you understand why I am doing this, since it’s the best for everybody to do things the right way and to finally update everything I want. But because of the sheer volume of work waiting for me only for the updated files alone (not to mention that I have a life outside the net, where I got to work and take care of my family, etc.), it’s going to take quite some time. It may be that it will even take longer than till the end of the year, but I really want to make this to start the new year 2022 with updated stuff and links the way it has to be.

   
In this past decade that I have been making papercrafts, and professionally about 6 years, a lot of work has been piling up and with time my skills got better as well. Therefore, I decided to overhaul all of my sites I have, throw away old stuff that I don’t like anymore and that don’t represent my skills anymore, generally to clean up all the stuff that I got and also, my biggest challenge yet, to update all of my papercrafts I will keep (premium and free ones) with a PDO file for easier assembly, since I know this is the biggest issue of them all for anybody trying to make my crafts. All of the PDO’s will be locked, most of them will probably be blank, some of the free ones I can give away as they are with texture, basically since I have at least +500 papercrafts, this is going to take some mayor time to do it right.

It’s just been some shitty 2 years really and its high time I actually start doing something in a positive way that I can actually influence directly, so I feel better. People waiting for an overhaul of my papercraft business policies and the few people actually sticking to me and supporting me all this time, it’s time I do things right again for the supporters pushing me onwards. Without the people standing behind my back and actually interacting with my pages, writing me encouraging messages, suggesting things, buying my templates and actually not sharing them in “private” groups (where I see everything anyway, because people tell me everything - the net and the papercraft community alike are a very small place), but also people talking behind my back and spitting in my face and not talking directly to me about things they don’t like (for me to improve and make it better), people generally hating my stuff because of my name, etc., both sides keep me going and I always strive to do my best for everybody alike. Especially since a lot of people quit in the last few years because of internet-bullies like that and the small community gets smaller and smaller as is, those of us left standing have to do double the advertisement for this amazing artform!

So, I’ll never give up on anything, it’s just gonna take some time and extra energy I currently have very little of, so that’s why it’s such a long time-out.

           
Expect a lot of things to be deleted, especially some of my old premium templates. I will try to keep as much of the free papercrafts as possible, probably moving them all to my Patreon page only (Antyyy's Papercrafts Patreon page, where you can download them regardless if you are financially supporting me or not, since they are free). Pictures will be updated, files will get PDO’s added and from 2022 premium papercraft will be sold with the blank, locked PDO files, policies will be updated, texts will be refreshed, links newly made, etc. etc. A lot of work, considering the amount of stuff I got and how many years I am doing this already. So, bear with me people; I’m making stuff better for each and everybody and I am just 1 person doing all this work that I would probably need a small IT-team for.

 
If you have any suggestions yourself, have anything in mind you would like to see newly made, suggestions, constructive feedback, wishes of what papercrafts you would like to see more of, etc., you can always write a comment or a personal note, on any of my sites. I would be more than happy to get feedback from as much people as possible to make it more user- and viewer-friendly as possible.

   
Wish me luck, bear with me, and in the meantime: Happy crafting~ Be back soon~