Halloween pumpkin Pikachu built papercraft

 

Halloween pumpkin Pikachu built papercraft

As promised, I have assembled my latest papercraft, the “Pumpkin Pikachu” just in time for Halloween ;)

The 15 cm big papercraft consists of 3 separate papercraft pieces, the pumpkin, the Pikachu and the pumpkin lid aka hat, so whatever you choose to built first, you are gonna be fine. Since at the end they are only put into and onto each other (or you can glue them in place, if you like at the end).

I made the pumpkin hat first, because it is the fiddliest out of the bunch, with the smaller parts of the pumpkin stem on the top. You make your way starting with the stem, gluing each piece on and following the PDO and edge ID PDF instructions, and when you are at the end of the stem, you build the remaining 3 parts of the lid.

The really important note here is to be sure to pre-fold the lines of the pumpkin, but only those that have to be bend inwards, so the pumpkin shape flows nicely and it actually looks like the shape it should (normally I never pre-fold anything, because it takes away the smooth look of the papercraft at the end, but with this pumpkin shape it is better to do so beforehand, so you know where it folds inwards and that is gets a nice and round look). Same goes for the bigger main pumpkin, so be sure to take your time and fold neatly so the lines align at the end.

Next, I made the bigger pumpkin. It has an inner and outer shell, so you can choose to make just the outer one, or you can make both, so the inner side looks nice and yellow-ish like in the pictures of the craft I made (or you can print the pumpkin parts on a yellow paper, so it’s easier, or even glue the pumpkin pieces on a yellow paper). Make the inner part of the pumpkin first, and then glue the outer part on it, so they both have the same shape and that it aligns nice with the pre-folded lines of both. – You can also choose to cut out the face of the pumpkin, if you would like. It would also look very nice, and if you put an electric candle in it, it can glow in a nice light just as a real one ;)

And at the end you got the Pikachu papercraft. Really simple and easy parts, nothing too small to glue together, apart from the smaller toes of his feet. I started with the ears and made my way down, all to the belly, then attached the 2D 2-sided tail inside the body (gluing it on the inner side of the Pikachu back with tape), that I glued together on a flat wire, and you also got a moving and posable tail with the Pikachu as well. I suggest closing the papercraft at the bottom (or with the feet), since the feet and bottom part are not visible when it’s inside the pumpkin. – My tip for the Pikachu is to start gluing the part of the papercraft where the textures meet. So, for instance, when you are making the face, be sure to start gluing the cheeks on the cheek flaps, so the colors align and the face is nice and centered.

And there you go. You can put the Pikachu now inside the pumpkin, where he fits and holds onto the edge of it and add his little silly hat and there you have it. And you assembled yourself a pumpkin Pikachu.

The whole papercraft took me probably 10 hours, plus or minus, including the cutting out of the template. I normally assemble things very quickly, since I am used to it, so take however much time you need to make it the way you like :)

      

You can view the template, along with some other info here:

https://www.deviantart.com/antyyy/art/Halloween-pumpkin-Pikachu-papercraft-894528548

Hope you’ll have a nice Pikachu Halloween celebration and enjoy Spooktober to the fullest. Enjoy and happy crafting~

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Halloween pumpkin Pikachu papercraft

Halloween pumpkin Pikachu papercraft

I got tons of work left to do with my “Under construction” status, and I am not even on 20% at the moment, since it takes so much time to edit all the PDO files and the unfolds….

BUT it’s Spooktober my friends, and I just had to do my traditional Halloween papercraft of Pikachu, in one way or another :D And here he is.

I did think about making the official Poke Center plushies, but I didn’t really like them that much. So, I did an original take on Pikachu in his pumpkin that I find super cute :D

The whole papercraft consists of 9 pages that you can print out and is unfolded to a proximate height of 15 cm. It has a separate 3D pumpkin (with an optional inner side), a separate pumpkin “lid” or hat that fits his head (with an optional inner side) with a 2D green stem on it, and a separate 3D model of Pikachu (with a 2D 2-sided tail), that fits into the pumpkin, is holding himself onto the pumpkin edge with his hands, and can be taken out, if needed.


All in all the Pikachu papercraft is very simple to make and the only small parts are the 3 toes on each of his curved feet. The pumpkin also needs to be shaped the right way, so it looks “pumpkiny”, so that is also something to take into account when assembling it, but that’s about it.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***


I got a lot of work left to do, but I do want to finish the assembly of this little cutie till the start of Halloween, so I definitely will post the assembled and built papercraft of him when I do so :)

Hope you are looking forward to and happy crafting~

Halloween Pikachu Witch built papercraft

Halloween Pikachu Witch built papercraft

** ** ** **** ** ** **** ** ** **** ** 

HAPPY HALLOWEEN EVERYBODY!

** ** ** **** ** ** **** ** ** **** ** 

What a great day, my favorite holiday of the year really :D and this occasion is exactly why I am showing you my one and only Halloween Witch Pikachu papercraft, built in all his glory by me ;)

The craft is about 20cm tall and is really easy to make. You have the 3D Pikachu body, which I built first, with his 2D tail, which I again made movable by adding in the flat wire as mentioned before in my Mimikyu Pikachu papercraft, so do use that tip, it really helps make it alive at the end and it's a super trick to move his tail around :) just makes you happy.

After I built the body, you just make his witch hat and put it just on (you can glue 2 small dost on each of the sides of his ears so it will not fall off, if you don't want it to be detached), his 2-sided cape, which you put on him at the end by gluing it together with the 2D pumpkin button and his small little lantern for candy collecting for today's big Halloween trick-or-tread and there you go, your own »spooky« Pikachu papercraft :)

For those who want to build it, it is a free template for anybody that can show me a picture of any of my free or premium built papercrafts, and as soon as I get the picture, I can send you the files over ;) – P.S. today I will be in the midst of Halloween celebrations, so I might answer anything to the pictures related tomorrow, since it's a holiday and I don't work on it :D

You can find more info’s about how to get the template here as well:

https://www.deviantart.com/antyyy/art/Halloween-pikachu-papercraft-free-papercraft-710110894

Hope you like it, happy Halloween and happy crafting~

***This is a FREE papercraft that you can get by sending me a picture of any assembled papercraft of my design that you made (free or premium alike).

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a mention (or link) to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art ;)***