Already posted my template preview version of this Fakemon called Faunazon here:
https://www.deviantart.com/antyyy/art/Faunazon-Pokemon-Fakemon-papercraft-977202209
And because I had the time and really liked this cutie, I also made the assembly preview and I can give some extra tips for the building process as well.
*As with any of my papercraft templates, the blank PDO is always included in these files, so you help yourself with the 3D preview in Pepakura to assemble it, but I like to post a bit of experience I have with building papercrafts to maybe make things easier for less experienced papercrafters and share ideas on how to make it simpler.
ASSEMBLY TIPS:
Best to start it, as with any of my crafts, is at the top and make your way down to the bottom. So, you can divide the assembly into many smaller parts that can be made separate from each other. You got: the head, the scarf, both arms and the tail, and then you make the torso and the legs with all of the already added parts at the end.
With the head, start by making both ears and then set them aside to make the tip of the snout. Make your way to the back of the head, attach the pre-made ears and close the head at the neck part. Then, you can start by making the top part of the torso and attach the already made head and the 2 pre-made hands on there. When those are attached, build the remaining torso, glue on the pre-made tail part and you got 2/3 done at this point.
Now, you have to make the remaining 2 legs. Best way is to, again, make them from top to bottom and slowly glue on part by part, so the legs are at the right angle to make the papercraft stand at the end. And you can close the legs with the last sole piece at the bottom.
Once the whole 3D body is done, you can add on the 2D, 2-sided pink flowers on the head and also attach the scarf on. For the scarf, make it so you glue all 3 parts of the scarf together but DON’T CLOSE IT YET. At the back of both parts where you need to glue it together, glue on the scarf ends on there and use a bit of strong tape, if you have to, to make it stick the way it should. Now, once you have both ends on, glue the scarf together by roping it around Faunazons neck and glue it together. Done.
With the help of the 2 long scarf ends, Faunazon can comfortably stand on its own without any additional weights inside the legs. And there you go, nice and easy.
***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***
Hope you like the Fakemon, really wanted to just have fun with this one and make something new from the Pokemon universe and just enjoy myself.
Do enjoy and happy crafting~
https://www.deviantart.com/antyyy/art/Faunazon-Pokemon-Fakemon-papercraft-977202209
And because I had the time and really liked this cutie, I also made the assembly preview and I can give some extra tips for the building process as well.
*As with any of my papercraft templates, the blank PDO is always included in these files, so you help yourself with the 3D preview in Pepakura to assemble it, but I like to post a bit of experience I have with building papercrafts to maybe make things easier for less experienced papercrafters and share ideas on how to make it simpler.
ASSEMBLY TIPS:
Best to start it, as with any of my crafts, is at the top and make your way down to the bottom. So, you can divide the assembly into many smaller parts that can be made separate from each other. You got: the head, the scarf, both arms and the tail, and then you make the torso and the legs with all of the already added parts at the end.
With the head, start by making both ears and then set them aside to make the tip of the snout. Make your way to the back of the head, attach the pre-made ears and close the head at the neck part. Then, you can start by making the top part of the torso and attach the already made head and the 2 pre-made hands on there. When those are attached, build the remaining torso, glue on the pre-made tail part and you got 2/3 done at this point.
Now, you have to make the remaining 2 legs. Best way is to, again, make them from top to bottom and slowly glue on part by part, so the legs are at the right angle to make the papercraft stand at the end. And you can close the legs with the last sole piece at the bottom.
Once the whole 3D body is done, you can add on the 2D, 2-sided pink flowers on the head and also attach the scarf on. For the scarf, make it so you glue all 3 parts of the scarf together but DON’T CLOSE IT YET. At the back of both parts where you need to glue it together, glue on the scarf ends on there and use a bit of strong tape, if you have to, to make it stick the way it should. Now, once you have both ends on, glue the scarf together by roping it around Faunazons neck and glue it together. Done.
With the help of the 2 long scarf ends, Faunazon can comfortably stand on its own without any additional weights inside the legs. And there you go, nice and easy.
***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***
Hope you like the Fakemon, really wanted to just have fun with this one and make something new from the Pokemon universe and just enjoy myself.
Do enjoy and happy crafting~
No comments:
Post a Comment