Shiba Inu diorama built papercraft

Shiba Inu diorama built papercraft

Already showed you my template of Pochi (:

https://www.deviantart.com/antyyy/art/Shiba-Inu-diorama-papercraft-1150294831

And now comes the assembly and tips for the built, so you can make one yourself.

*********************

The papercraft has many different optional parts, so you make the diorama, the dog house, the bowl, the dog itself and the 2D bones all separately.

For the stand itself, you build it top to bottom, like you would make a 3D box and you close it with the bottom part. Then you take the 4 parts for the fence and *pro-tip: glue them on each other (before cutting them out) by overlapping the parts (you can do this best if you turn them to a light source or place it near a window, so you can partially see-though the paper and know where to glue to together) and only when they are glued together, cut them out. I do this with all of my 2D 2-sided parts I make, since it’s the easiest and most precise way to do this. It’s really easy, so try it out. When you have the fence, knick and fold the bottom part of the fence a bit, so you can glue it on the flat surface of the stand and there you go.

For the bowl, it’s easiest by gluing the 2 sides of the bow together first, and BEFORE you close the bottom, you slide the water part inside the bowl, put glue on the flaps of the water part, and jam it upwards right to the point where the water stands and let dry. Only then, close the bowl and it’s done.

The dog house is also simple to make, a box-pattern craft you do and at the end close with the bottom part. And when the base house is done, glue on the flat root on it.

For the dog itself, best making it top to bottom, since I always pose the flaps that way with my papercrafts.

Start by making the 2 ears and glue together the whole head. Then start making the 4 paws separately, glue on the first few breast parts of the dog on the head, glue the front paws inside and make your way back to the back paws and glue those in. Now, make the 3D tail separately, and in the end, close the butt at the back and just slide the tail inside.

All you got to do is to cut out the 2D bell + collar to glue in around its neck and cut out the 2D bones, and the shiba inu diorama is done.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/98a0fa5d93

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

I hope you like this little Shiba cutie and you make your own version of it.

Enjoy and happy crafting~

Labubu FREE papercraft

Labubu FREE papercraft

Why am I only hearing about these ADORABLE little monsters now? XD damn, I'm old.

Anyway, apparently hugely popular a few months ago, I saw this to-die-for-cute designs of little monsters called Labubu. There are a few types, but apparently this smaller cutie without a tail is a Labubu. They remind me so much of the Moomins and Little My, I fell in love with the design as soon as I saw them!

So, why not make a simple papercraft design of them so everybody can enjoy their cute little grumpy faces? (:

****************************

The papercraft itself is unfolded to 17 cm and has 3 pages to print out. A basic, easy 3D model, with smaller 3-finger hands and pointy feet, but else very simple to make.

I also included the whole base pack of colors, so you have 6 colors included in the free download: the brown, the green, the pink, the blue, the light brown, and the gray one. Who is your favorite out of the bunch? Or are you going to make all 6 of them?

*To download, just follow my Patreon link bellow, find the Labubu post, and you’ll see the ZIP file at the end of the post. Click that and the download will start. You can do that 100% free, without needing any account, subscription or anything like that. Same goes for all of my FREE papercrafts I make and release. Easy as pie (:

**************

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art ***

****************************

Additionally to this, you can also view the 3D preview of the papercraft (same as it looks in the included PDO file) here:

https://sketchfab.com/3d-models/labubu-free-papercraft-142896d1f1e943299cefc1a827c7f271

**************

Hope you like them and I get to see it being made all over the net.

Enjoy and happy crafting~

Toravolt (Coromon) papercraft

Toravolt (Coromon) papercraft

Played a new Pokemon-based original game called “Coromon” and….. I…... LOVED IT!

It was such a nostalgic walk back to the real OG based pixel Pokemon games I loved on the old Nintendo consoles. They even made a Pokemon tribute in the game and made an Ash character NPC named “Asheton” XDDD he was so depressed the new tech in the Coromon universe is sooo better than in Pokemon, it was so funny XD such a cute easter-egg.

Anyway, the game itself is really addictive, the Coromon monsters are all super nicely designed, loved the old pixelated vibe, and the monsters with their types and attacks are actually very balanced, compared to other ROM-hack games made from Pokemon. I really liked it and I stayed engaged right to the very end.

And because I liked it so much, I had to make a Coromon monster design in 3D that I fell in love with the moment I saw it: Toravolt

**************

The papercraft is unfolded to 16 cm and has 6 pages to print. The whole thing is basically a 3D edgy tiger craft, with 4 3D paws, a spikey 3D tail, a lot of 3D spikes and 2D 2-sided spikes in the middle.

Best way to assemble it is to make it from head to tail, as with all of my papercrafts. You can easily close it then either with the paw bottoms or at the tail.

*Note: Coromon is a pixel-based game, so the 3D interpretation of Toravolt is not 100% accurate, since I made it in a design I found cool and to give it my own personal touch, since it’s my craft.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4d0bbe6755

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. And if you are a fan of monster fighting games, you NEED TO PLAY IT, like right now! Now! Go buy it on Steam and play your little hearts out with it (: You’ll see you’ll love this one as much as I did.

Enjoy and happy crafting~

Fast ball (Pokemon) papercraft

Fast ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Fast ball design papercraft box. It is unfolded to 16 cm (13 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c4ac371cc2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Female Ranma (Ranma 1/2) papercraft

Female Ranma (Ranma 1/2) papercraft

As you maybe remember, I already did some older Ranma½ papercrafts in reference of the old 1989 anime. You can see the old designs I made in a preview here:

https://www.deviantart.com/antyyy/art/Ranma-1-2-papercraft-remakes-1146197007

And since the new remake anime came out, I decided to also remake my old papercrafts of the main characters in their glorious, fresh new looks!

***************

 This is my new Female Ranma papercraft from the anime Ranma½.

The papercraft is unfolded to 24 cm and has 4 pages to print out. The papercraft consists of a 3D model of Ranma, optional 3D and 2D hand versions and her simple 3D bucket.

The papercraft stands on 2 feet, but it would be better to additionally reinforce the legs when assembled, so it can’t tip over that easily.

***************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/92665904d9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

***************

Hope you like the new look of the papercraft and happy crafting~