Gengar Poke ball (Pokemon) papercraft

Gengar Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Gengar Poke ball design papercraft box. It is unfolded to 18 cm (12 cm of the actual Poke ball height) and has 4 pages to print out (all 4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/fe421dfcd8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Bob-ombette (Super Mario) papercraft

Bob-ombette (Super Mario) papercraft

Got into some Super Mario lore basically, and found some not-so-well-known and more-known OC characters from the universe. So, I decided to make some of them into papercrafts, the ones I liked really, and make them the way I think they look cutest.

**************

The papercraft is unfolded to a height of 27 cm and has 5 pages to print out. The Bob-ombette (or princess Bob-ombette aka Bumuhei-hime) is made as a basic 3D model, with simple separate 2D front and back hair, optional 3D or 2D hands and a windup key, some simple 2D flat add-ons (the bomb fuse, the ears), her 3D crown, and a simple 3D bob-omb in her hands as an optional piece.

She stands with the bent pose, but the feet really need to be additionally filled with weights so she holds upright and doesn’t tilt over.

The fiddly part would be the 3D hands and the 3D windup key option that is just glued on the back as a whole part.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/61956331da

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like my vision of her and how I think she looks the most adorable. Enjoy and happy crafting~

Love ball (Pokemon) papercraft

Love ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Love ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/32bee049d4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~