MC Pikachu (Halloween) built papercraft

MC Pikachu (Halloween) built papercraft

I already posted the template of the “POKÉMON JUMPIN' HALLOWEEN PARTY” MC Pikachu:

https://www.deviantart.com/antyyy/art/MC-Pikachu-Halloween-papercraft-1115672802

And now you can also see the preview pics of the assembly (:

**************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

Now since it has a jacket on, I suggest you first make the hoodie separate and glue that on the head. Then make the whole jacket part separately (including the sleeves with the hands) and then you glue the body shirt on the head at the front neck part. When you have the body shirt on, you glue on the pre-made jacket on the edge of the head. Next, put glue on the flaps of the body shirt parts where it touches the inner sleeves, and glue that on and then put glue on the remaining flaps of the inner edge where the body shirt and the jacket meet, and glue that on to get the body – with this method, although it sounds complicated, is less complicated and you can have that few millimeters margin of error to join them together as well, without the holes being noticeable if the edges don’t fit 100%.

Next, you glue on the leg/bottom part of the papercraft. Before doing anything, make the 2D 2-sided tail by putting in some wire inside it so it can hold and move at the same time. When you have the tail, make an incision line on the bottom part of the legs, so you can slide that wire inside the body and glue the tail from the inside of the body with strong tape.

When you got this, all you have to do is the 2 feet separately, and when you are done, slide them inside the 2 holes in the bottom with glue and attach them like that.

All that is left are the 2D parts of the jacket, the simple earphones that you can glue on by putting a bit of glue on the edge of each earphone and make the 3D optional stand and the MC Pikachu is done.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/bd89ced915

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like him and happy crafting~

Mimikyu Poke ball (Pokemon) papercraft

Mimikyu Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Mimikyu Poke ball design papercraft box. It is unfolded to 21 cm (16 cm of the actual Poke ball height) and has 4 pages to print out (all 4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/87604e93a6

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Hikari Gatomon pajamas (Digimon) papercraft

Hikari Gatomon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Hikari (Kari) in her Gatomon (Tailmon) pajamas.

*********************

The papercraft is unfolded to a height of 22 cm and has 5 pages to print out. It consists of 3D version of Hikari in her Digimon pajamas. It has a 3D head with 2D hair parts, 2D 2-sided ears, a 3D body with 3D paws and feet, a 2D hood with 3D ears, and a 2D 2-sided tail with the 2D ring.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/13e2603ed8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case. Enjoy and happy crafting~

Heavy ball (Pokemon) papercraft

Heavy ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Heavy ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4c7cb63df2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~