Eevee house papercraft

Eevee house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 14 cm heigh with 14 pages to print out.

It consists of a mystery dungeon diorama of the Eevee normal starter house, including the in-game references of the house interior as exterior + a simple Eevee model with its scarf. It has all the basic add-ons in the house as around the garden, including the Eevee mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/2b1a5ac678

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck + the fluff on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 front and 2 back feet separately. Make the 3D tail as well, since you can just attach it later on.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 back feet you made before and build the torso around those and when you put together the hole for the tail, attach that inside it first. Then you can glue on the front holes for the front legs and glue those 2 inside.

Now, before you do anything else: glue the tail inside the torso by adding extra stripes of tape inside the tail and torso where its glued together, because it can snap off very easily and you need to reinforce that part. Also, because it’s in a sitting pose, you don’t need to put in extra weights, since it sits on its own just fine.

When the whole torso is done, you can glue the head onto the torso where the frills/fur is.

At the end, you glue on the various bows and flowers on it and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Eevee & Pikachu, since they are meant as a set and fit together in size as well. You can find Pokepark Pikachu here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 feet you made before and build the torso around and upwards. Once you come to the holes for the arms, also glue those inside.

Now, before you do anything else 2 things to do: 1. glue the tail inside the torso by making an incision at the back and gluing it with tape on the inside. If you did as I did, you’ll be able to move the tail with the wire that way as well. 2. You put some weights inside the torso to make the Pikachu stand better (Pro tip: I always use small pebbles, since they are small to fit inside any holes you have and also heavy enough to make it heavier to stand. They are also light enough at the same time to not damage the paper when you do put them in.

When the whole torso is done, make the sleeveless jacket and put it around his arms and then glue it with a few dots at the front to make it hold its place. Now you can glue the head onto the torso where the frills are.

At the end, you glue on the various bows and flowers on it and glue on the hat as well and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Pikachu & Eevee, since they are meant as a set and fit together in size as well. You can find Pokepark Eevee here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Ufolett (Fakemon) FREE built papercraft

Ufolett (Fakemon) FREE built papercraft

Already released the FREE template of this cutie here:

https://www.deviantart.com/antyyy/art/Ufolett-Fakemon-FREE-papercraft-1266292137

And now you can see the assembly preview and tips of the build as well.

Let me also state again that it was apparently first created by »PaulDrawsArt« and I later found the 3D animation of »MrFrtc« on Reddit. So, I took those ideas and made a OC papercraft version of Ufolett in its normal and shiny form.  

**************

ASSEMBLY TIPS:

Really nice and easy from top to bottom, as with any of my papercrafts.

Start by making either the 2D or 3D antenna (I made the 2D version here, but both are included) and build the head around it. Then make the UFO part of it around the head part till you only have the bottom piece and the 3 half-round lights left.

Make each of the 3 lights separately and then glue them on the last bottom piece of the UFO. Once you have that, close the whole papercraft with that bottom part, nice any slowly, each flap separately, so it holds nice and looks neatly. Done.

Pro tip 1: I also used some thin thread to hang it from my shelf so it can “float” and it looks really fun that way :) UFOs are supposed to float and fly, so make it fly!

Pro tip 2: Papercrafts are not to be rushed. The more time you spend on gluing a flap on, the neater the end result will be and it always shows. Take your time and do it right the first time. Even if the glue happens to dry and you didn’t glue it on, no worries, just put some more glue on it and go from there. The gluing part can always wait, once it’s glued on you can’t fix it anymore.

*NOTE: The papercraft preview is only of the normal colored Ufolett papercraft, the template also includes the shiny version.

******************************

***This is a FREE papercraft that you can download for free on my Patreon page: www.patreon.com/antyyyspapercr….

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

**************

Hope you like the design. Download it on my Patreon page. Enjoy and happy crafting~

Chikorita house papercraft

Chikorita house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 19 cm heigh with 14 pages to print out.

It consists of a mystery dungeon diorama of the Chikorita grass starter house, including the in-game references of the house interior as exterior + a simple Chikorita model with its scarf. It has all the basic add-ons in the house as around the garden, including the Chikorita mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/f1cfc780d4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Gecqua (Pokemon WW) built papercraft

Gecqua (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed water starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Gecqua-Pokemon-WW-papercraft-1304593864

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the snout first, and build the eyes around it. Glue on the rest of the head, till you have the whole head. Add the 2D eyelashes on its eyes (or do this at the end).

Next, start making the front torso part and glue it on the head, making sure to additionally put in some tape from the inside to make it hold better and that it doesn’t snap off, because the neck is very thin.

When you have the first half of the torso, set this aside and make the 4 3D legs and the 3D tail all separately first.

When you have those, glue the first 2 front feet inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back legs and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts and you are done.

The legs are thin, but because of the pose it doesn’t need any weights inside the legs because the head balances the whole figure, so it should be fine without them.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2d836afe6a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pombon (Pokemon WW) built papercraft

Pombon (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed fire starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Pombon-Pokemon-WW-papercraft-1304595547

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head, leave the hole for the snout and build the whole front part of the head. Now build the snout part separately and glue it inside the hole, so you can center it nice and smooth. Add the 2 small 2D teeth and tounge and glue on the front fur parts on as well.

Next, start making the back side of the neck with the back side of the fur parts. Glue the fur parts together, so the fur in the back and the front is touching.

When you have the first half of the body, set it aside and make the 4 3D paws and the 3D tail all separately first.

When you have those, glue the first 2 front paws inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back paws and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts (Pro tip: Put some weights inside through the feet holes at the end at the back, if you want to make it stand better. It stands on its own, since 3 of his paws are on the bottom, but it can stand better that way) and you are done.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/545e777ad3

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Mudkip house papercraft

Mudkip house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 14 cm heigh with 10 pages to print out.

It consists of a mystery dungeon diorama of the Mudkip water starter house, including the in-game references of the house interior as exterior + a simple Mudkip model with its scarf. It has all the basic add-ons in the house as around the garden, including the Mudkip mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/54cde25d83

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Ms Wavychu (Pokemon WW) papercraft

Ms Wavychu (Pokemon WW) papercraft

Another Pokemon gen probably means another version of Pikachu in some kind of way, and with the short trailer reveal we actually got 2 of them! Both are not really peak Pikachu designs for me, because dressing up animals/Pokemon is just weird and torturous behavior, but with Pokemon it can somewhat seem cute and as if they themselves really like it. It is fictional after all ;9 While the “drunk uncle that’s always on vacations” aka Windychu looks really cringe for me XD the counterpart of the “fun aunt” aka Wavychu does look miles better and actually somewhat cute. So I decided to make it into a papercraft as well.

*******************

The papercraft consists of a Ms. Wavychu 3D model with add-on 2D clothes and the cap that are optional. The tail is also 2D 2-sided, so when assembling, you can put wire between them when you glue them together to make it a movable, posable part.

The clothes are best assembled partly separate from the Pikachu and then you just close the last few flaps on the model directly. The cap does come off, but if you want to make it not slip off and permanent, put glue on the edges where it hold onto both ears and that should fix it.

It is unfolded to 18 cm and has 6 pages to print.

***********************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3c6f6ee278

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************** 

Hope you like the design and that we get to see news for other stuff from the Winds and Waves games soon as well. I can’t wait to see more AND more new Pokemon in the new gen as well (:

Enjoy and happy crafting~

Peakychu (Pokopia) built papercraft

Peakychu (Pokopia) built papercraft

Pokemon Pokopia is out, and I already made the Peakychu variant as a template:

https://www.deviantart.com/antyyy/art/Peakychu-papercraft-1264125375

And now you can also see the assembly preview and tips.

****************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso onto the pre-made head till you get the 2 holes for the arms, and glue those inside. Build the torso downwards a bit more till you are only left with the bottom part and the legs. At this point, make a small incision on the back side to stick the tail into the torso and glue the tail from the inside onto the torso with some tape, so it can move freely.

All that is left is to glue on the last bottom parts of the torso and when you have the 2 holes for the feet left, glue them inside. Close the whole craft with the soles of the feet (Pro tip: Put some weights inside through the feet holes at the end if you want to make it stand better) and it’s done.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/00158911c0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Torchic house papercraft

Torchic house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 15 cm heigh with 13 pages to print out.

It consists of a mystery dungeon diorama of the Torchic fire starter house, including the in-game references of the house interior as exterior + a simple Torchic model with its scarf. It has all the basic add-ons in the house as around the garden, including the Torchic mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/507f12a8ca

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Browt (Pokemon WW) papercraft

Browt (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the grass starter called: Browt!

*********************************

The papercraft is unfolded to 14 cm and has 4 pages to print. It has a basic 3D model of Browt, with glue-on separate 3D wings and tail. The smaller parts are the slender legs, the beak and the crest on his head, else it is a pretty basic simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/b43186bb01

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pombon (Pokemon WW) papercraft

Pombon (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the fire starter called: Pombon!

*********************************

The papercraft is unfolded to 16 cm and has 4 pages to print. It has a basic 3D model of Pombon, with 2D 2-sided fur you glue together on both sides, and some fur 2D parts. The smaller parts would be the feet and ears, but all-in-all it is a pretty simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/545e777ad3

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Gecqua (Pokemon WW) papercraft

Gecqua (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the grass starter called: Gecqua!

*********************************

The papercraft is unfolded to 10 cm and has 3 pages to print. It has a basic 3D model of Gecqua, with 2D 2-sided feet and eyelashes. Since the feet are actually flat, it is a pretty simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2d836afe6a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pokemon Wind/Waves starter papercrafts sneak peek

Pokemon Wind/Waves starter papercrafts sneak peek

Yesh, I am now officially the FIRST to make the papercrafts XD So, here are my dibs and confirmation.

I am making all 3 new starters of the new Winds and Waves 10th Pokemon generation that was officially confirmed yesterday in the 30th anniversary.

All 3 are super adorable, so I am furiously modeling these and texturing as we speak, so I can release them in the next few days to come 9;

Stay glued on the screens for more posts to come (:

Mega Meloetta (Fakemon) FREE papercraft

Mega Meloetta (Fakemon) FREE papercraft

It’s the 27th February 2026 and we all know what that means, right? Right??!??!

It’s the 30th POKEMON ANNIVERSARY!!!

30 years of Pokemon games, anime, merch and everything around these cute little feisty critters. These so-called pocket monsters have been the sole reason I have even started building papercrafts in the first place and then designing them myself. I wanted a whole room full of Pikachu figurines all for myself and in those days, it was very hard getting any merch of it and it was even pricier to buy them anywhere, and just making a Pikachu out of printed paper was simply magic in its own right.

Pokemon are a huge cornerstone of the papercraft community and even if I absolutely despise Nintendo (and subsequently GameFreak that pulls with them in the end) and do not agree on anything they have been doing in the last few years, it doesn’t change that Pokemon non-the-less have had and always will have a huge chunk of my heart and soul.

And because I wanted to celebrate this day, whatever they have planned on releases and sneak-peeks, I wanted to make a really pretty and awesome papercraft for all of you Pokemon fans out there!

*****************

I present to you the Fakemon Mega Meloetta!

It is based on the actual mythical Pokemon Meloetta in its Aria and Pirouette Forme, but with made-up mega evolutions for both of them.

The whole concept and reference picture comes from the awesome @VIKworks (https://www.deviantart.com/vikworks) which made both of these amazing-looking ideas and concepts. They were so awesome and allowed me to take their idea/illustration and make them into papercraft figures so everybody can print them out and make them for themselves to enjoy. Please go visit their pages on here and on their other social media sites and look at the cool work they are doing and leave a nice comment or 10 for them as well! Thank you very much again from me as well (;

**************************************

The papercraft is unfolded to 20 cm and have 8 pages to print for both (with 3 + 3 double-sided print pages for colored inner sides for their hair and dresses).

It consists of 2 mega evolution Meloetta Fakemon: Aria Forme and Pirouette Forme. Both forms have 3D bodies (with closed or open eye options and with various add-ons), simple 2-sided 2D hair and 2 separate simple 3D stands.

*Note: They do not stand on their own, especially the Pirouette Forme, so I have included 2 stands for them, so you can reinforce the legs with wire and weights, so they can stand. Both papercrafts also have very small parts and thin limbs, so they are harder to make.

*****************

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art ***

**************************************

Hope you enjoy 30 years of Pokemon by making a cute Mega Meloetta or 2 for yourselves as well. Hope I get to see some of them assembled and shared online, I would love to see them being made!

Enjoy and happy crafting~

Pokemon Center Clerk papercraft

Pokemon Center Clerk papercraft

Finally!!!! I wanted to make this papercraft ever since the Pokemon Legends ZA game came out!! Man, I am so backlagged with papercraft work, it took me months to finally finish it and get it ready! So, here she is in all of her different looks!

**************

The papercraft is unfolded to 22 cm heigh with 3 pages to print out.

It consists of a 3D model of the so-called “Pokemon Center Clerk” from the ZA Pokemon game that you can even battle in the royale. In other games, she is more known as Pokemon Center Nurse, or even Nurse Joy from the original games, but in the latest version and look, she has 4 different forms, so I made 4 versions of her.

You have the 3D model of the Nurse/Clerk, with simple 3D hair loops in the back, a 2D hat that you can remove from her head, optional 2D or 3D hands and an optional scarf around her shoulders. The template includes all 4 different looks of her in the game.

With this simple standing pose as she has in the game as well, she should be able to stand as is, but it would be better to add some weights inside her legs, just to make her sturdier.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/5f73526a5a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like her as well! They look so adorable in this version of the game, I simply couldn’t resist XD

Enjoy and happy crafting~

Pikachu house papercraft

Pikachu house papercraft

As you maybe know, 2026 marks the 30th anniversary of Pokemon! And in honor of my fav genre of Pokemon games, I wanted to make a tribute to the objectively best Pokemon games out there ever (no other opinions allowed here!! XD): POKEMON MYSTERY DUNGEON!!

Everybody knows 2DS and 3DS are the best, most awesome and amazing Pokemon consoles out there and that there will ever be :9 and my fav games of those coming out for the 3DS were mystery dungeon games! Love them. Always will love them. And I wanted to make these projects for so long now, because I simply love these Pokemon-themed houses from the game and I think they are adorable to no end. And since it’s the 30th anniversary, I had to take the time and finally make these in the flesh.

I have made the basic starter-type houses for the most common Pokemon of the game and the ones I loved to play as. So, I hope you enjoy them!

**************

The papercraft is unfolded to 12 cm heigh with 13 pages to print out.

It consists of a mystery dungeon diorama of the Pikachu electric starter house, including the in-game references of the house interior as exterior + a simple Pikachu model with its scarf. It has all the basic add-ons in the house as around the garden, including the Pikachu mailbox and its flag.

I have referenced all of the room and garden decoration from the last gen game “Pokémon Mystery Dungeon: Rescue Team DX”, so I redrawn all of the walls and textures from my saved games from my 3DS as well as upgraded some of the looks of the outside to make it look more new-gen-ish and high quality.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/e33c28692b

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like it and give the games a go again. I’m sure you’ll love them as much as I do (: They are so cute and story-driven, you’ll fall in love with them in no time at all.

Enjoy and happy crafting~

Pikachu doll (Pokemon) built papercraft

Pikachu doll (Pokemon) built papercraft

I already posted the template of the Pikachu doll:

https://www.deviantart.com/antyyy/art/Pikachu-doll-Pokemon-papercraft-1228863678

And now you can also see the preview pics of the assembly (:

**************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

Now you can start assembling the belly part on the head to where you have the 2 holes for the arms. Set aside and make the 2 arms separately. When you have those, put them in the holes for the arms and glue them inside. Build the rest of the body till you have the 2 holes for the legs and the bottom left.

Build the 2 feet separately and when you have those, all you have to do is glue the 2 feet inside the holes in the bottom. When they dry, close the doll on the bottom with the last piece that has no flaps on them, and the body is done.

All that is left is to glue the separate, simple 3D tail on the back at the right angle and add the 2D 2-sided tag at the side of the body. Make sure to put the flaps inside the body, so they are not visible (you can either leave the flaps unglued at that small spot on the body, or make a small incision with a x-acto knife) and it’s done.

The doll should sit nicely on its butt, but to be sure you can add some small weights inside the body BEFORE you glue the last bottom part on to close it.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/3d9210a74c

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the Pika doll ;3 Enjoy and happy crafting~

Snorlax snowman built papercraft

Snorlax snowman built papercraft

I released the snowman Snorlax papercaft already and posted it:

https://www.deviantart.com/antyyy/art/Snorlax-snowman-papercraft-1278609041

And now you can also see the preview pics of the assembly (:

**************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head. Build the remaining body one stripe at a time downward and close the body with the last lid part that hasn’t got any flaps.

Build the scarf separately but just attach and glue it together so you have one side open. With the open side, slide the scarf on the body and glue the 2 remaining flaps together to close it.

Add the dangling scarf parts, make the 2-sided berry for his head and add the bottom piece of the snow on him and it’s done.

A really simple craft to make, the only small parts are the ears, so make those first and just build all the remaining body parts around that. And since it has a flat bottom and the snow piece as well, it won’t have any problems standing upright.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/70b8993ecf

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the snowy little Snorlax I made. Since it marks the 30th anniversary of Pokemon this year, it will probably be a Pokemon-heavy year for my papercraft designs, but we’ll see what they have to announce in February and we’ll go from there (;

Enjoy and happy crafting~