CatBurger (Simple version) OC papercraft

CatBurger (Simple version) OC papercraft 

Saw a challenge thing on DA about how to draw a Burger that looks like a cat, and got the idea to make my own version of “CatBurger – build your own burger papercraft” and in a SUPER SIMPLE VERSION :)

******************************************************************************

So, what is this all about? As the name “Super simple papercrafts” suggests, it is a project of really simple papercrafts I make. Since I saw that many people are somewhat intimidated by my intricate designs and overall papercraft really, I wanted to show that it’s not the case and that I wanted to make an effort to make papercrafts available really for any kind of papercrafter, be it beginner, advanced or pro. I decided to address the issue and show that anybody can make papercrafts and therefore designed some fun crafts that REALLY ANYBODY CAN MAKE, super simple and really fast. But most of all, fun!

These papercrafts are simple in design regarding how many pieces there are, they are unfolded a bit bigger to make it simpler to assemble them, they have more detached (2D) pieces that you just make and glue on, and still look super sweet and adorable so anybody will want to make them.

You can find all of the “Simple Papercrafts” I designed in my folder:

https://www.deviantart.com/antyyy/gallery/75506959/simple-papercrafts

*******************************

This papercraft is unfolded to a height of 24 cm and has 5 pages to print out with all of the optional parts. The burger itself should be anywhere from 5 to 12 cm high, depending on what ingredients you want to use for your very own CatBurger.

It consists of:

-          2 simple 3D buns (the upper one also having 3D cat ears) with 2D paws and a 2D 2-sided tail,

-          6 2D onions,

-          3 3D tomato slices,

-          a simple 3D sunny-side-up egg,

-          3 2D bacon slices,

-          ketchup,

-          4 3D pickle slices, 

-          2 2D cheese slices,

-          2 3D grilled patties,

-          2 2D salads,

-          and a either 2D 2-sided flag or a 2D 2-sided pickled olive as the topper.

All of the parts are OPTIONAL and you can choose whatever ones to make your own CatBurger papercraft. And you can re-print them out to make even more, if you like.

Also, all of the 3D optional ingredients can be simply turned into 2D flat parts, by cutting away the middle stripe part, if you choose to make your burger even simpler.

The only real challenge to make here is to choose what ingredients to use in this. And if you can’t choose, why not make 2 or 3 different versions of it, each with different parts inside :)

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/be83de42a0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like the cutie and you don’t get too hungry watching or assembling it XD

Enjoy and happy crafting~

Origami bird ((Honkai Impact 3rd) papercraft) built papercraft

Origami bird (Honkai) built papercraft

Already released these cuties in my premium template:

https://www.deviantart.com/antyyy/art/Origami-bird-Honkai-papercraft-1078884104

so, I had to make at least some of the cuties and show all of you how ADORABLE this little chick are XD just wookk at themmmm, swooo kwwute :3

*******************************

ASSEMBLY TIPS:

Each of the birds took me 1-2 hours to make, since I am a fast assembler (and because I made the 3D parts into 2D parts, which you can do yourself as well – read *NOTE below).

They are really simple to make, since they are a boxy shape and there are no small parts to make, apart from the beak.

Start with the feather crest.For the crest *pro-tip: glue both sides of the crest on a wire. This way, the crest will hold on the head and you’ll be able to pose and bend it later on.

Set aside and make the separate wings and tail. You need to either glue them together with the stripe part in the middle to make them 3D, or cut out the stripe away and make a makeshift 2D part.

Set those aside as well and start with the assembly of the main bird body. As with all of my papercrafts, you start from top to bottom. Meaning, you start making the top of the head and make the whole head part first. Next, glue together the smaller beak, put glue on the flaps of it, and slide the beak inside the head and glue it on like that. This way it’s simpler to make, and the beak will be 100% in the middle, since you can move it.

Now we need to glue the feather crest inside the head before continuing with the remaining body. Make a small incision with a x-knife where the texture shows you, just small enough to make the crest width with the wire fit inside. When you slid the wire and crest inside the incision, glue the remaining wire on the inside with tape and tape it well. The crest will now hold and you’ll be able to pose it.

Then make the remaining body of the bird. And when you come to the last bottom part with the legs, pre-bend the legs first, bend the flaps of the legs outwards and glue the legs together. When you have the legs, you can glue them then on the bird body and close it that way. The papercraft does NOT need weights or anything, since it can sit just fine, because of its simple boxy design.

And all that is left is to glue on the 2 wings and the tail part at the angle you wish, and the cute pudgy birdy is done

********************************************

*NOTE that I did make the birds with 2D parts. If you do not wish to make the bird with 3D wings and a 3D tail, you can cut off the middle stripe part and just glue the front and back part together as a 2D part. That way the assembly is not only easier to make, but also faster.

Since I do all of the papercraft 100% and completely by myself (not only the design, texture and 3D model and pose, but also the built previews and pictures), I do sometimes skip parts or make them simpler. I basically did an easier version of them to make these in a few hours and to be able to show them to you, since I got so much other stuff to work on

***************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e001251e09

You can view all of my available premium papercrafts that are for sale on my Ko-fi page: ko-fi.com/antyyyspapercrafts ***

*********************

Hope you find the origami birds as adorable as I do.

Enjoy and happy crafting~