Sir Aaron (Pokemon) 3D model commission

Sir Aaron (Pokemon) 3D model commission

Yeah, who knew. Antyyy’s Papercrafts is doing 3D model commissions as well. For quite some time now, actually. But whatever I did, the commissioners didn’t want it to be shared openly. But THIS TIME, I can show you what I can do with this mesh and polygons (;

************************************

The commission here was to make a “Sir Aaron” 3D model that can be used in Vroid (I think). Sir Aron, of course, being the main guardian that appeared as a flashback character in the Pokemon movie “Pokémon: Lucario and the Mystery of Mew”. A lovely movie, may I say myself ;_; and sad.

The base was modeled by me from his reference sheet of his ancestor “Riley”, which we know from the Diamond and Pearl Pokemon games, as well as his reference sheet from the movie.

The 3D model itself and all of the textures are made by me. The model is a basic low-poly 3D model and it has 8 UV-maps and textures for each part.

****************

As long as you are interested in a low-poly anime 3D model that is unrigged and without bones or animation, I am the place to do that for you (: And I quite enjoy them as well, because they are sooooo less complicated to make as papercrafts XD

************************************

***This is a paid commissioned 3D model. Commissioned models cannot be re-sold, with some exceptions. If you are interested in a purchase or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

**************

Hope you like the design. The model will be rigged as well, so I asked to share some pics or videos how he looks in full action when it’s done as well. Hopefully I can share those on here when they are ready. 

Enjoy and happy crafting~

Eeveelution Poke balls (Pokemon) papercraft

Eeveelution Poke balls (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

These are the OC Eeveelution Poke ball design papercraft boxes. They are all unfolded to about 14 cm of the actual Poke ball height and have 5-6 pages to print out – depending on what Eeveelution you are making (5-6 of them being double-sided).

The preview picture shows the unfolded Poke ball templates that stand apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed previews and how they look, just so you know they are closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/33c03700dd

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Elekid Poke ball (Pokemon) papercraft

Elekid Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Elekid Poke ball design papercraft box. It is unfolded to 21 cm (13 cm of the actual Poke ball height) and has 5 pages to print out (4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/846dab54f5

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Jinx (Arcane) papercraft

Jinx (Arcane) papercraft

Another papercraft a bit too late for the main hype XD just watched the series myself as I got time, and I fell in love with it immediately! Such a good series, it has everything! And that’s coming from me, because I freaking hate LOL and all of those type of games ;P I went with all of the ups and downs and not a single episode was boring. Really loved it! (And the same makers are going into another animation series as well, so I can’t wait what they come up with next!)

Anyway, because I fell in love with the series, and damn it hit me in the feeli’s all too deep, I had to do Powder aka Jinx, because I loved her most ;_; such tragedy, such an epic story, damn…

******************

The papercraft is unfolded to 30 cm and has 6 pages to print.

It consists of a 3D model of Jinx, with 2D 2-sided braids, 3D and optional 2D hands, a simple 3D gun she uses, and various add-ons, such as the belts, accessories, etc. Note that the top is also optional, since it’s an add-on, so the top shirt can be taken off (yes, boobie texture included under the shirt, so it’s all there).

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3a11f858b5

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

******************

No matter if you love or hate LOL, you HAVE to see this series! It’s such a good one, and each episode has it’s own universe of beautiful animations, 3d modeling, a wonderful and immersive story and characters you immediately fall in love with.

Hope you like Jinx as much as I do, enjoy and happy crafting~