https://www.deviantart.com/antyyy/art/Shiba-Inu-diorama-papercraft-1150294831
And now comes the assembly and tips for the built, so you can make one yourself.
*********************
The papercraft has many different optional parts, so you make the diorama, the dog house, the bowl, the dog itself and the 2D bones all separately.
For the stand itself, you build it top to bottom, like you would make a 3D box and you close it with the bottom part. Then you take the 4 parts for the fence and *pro-tip: glue them on each other (before cutting them out) by overlapping the parts (you can do this best if you turn them to a light source or place it near a window, so you can partially see-though the paper and know where to glue to together) and only when they are glued together, cut them out. I do this with all of my 2D 2-sided parts I make, since it’s the easiest and most precise way to do this. It’s really easy, so try it out. When you have the fence, knick and fold the bottom part of the fence a bit, so you can glue it on the flat surface of the stand and there you go.
For the bowl, it’s easiest by gluing the 2 sides of the bow together first, and BEFORE you close the bottom, you slide the water part inside the bowl, put glue on the flaps of the water part, and jam it upwards right to the point where the water stands and let dry. Only then, close the bowl and it’s done.
The dog house is also simple to make, a box-pattern craft you do and at the end close with the bottom part. And when the base house is done, glue on the flat root on it.
For the dog itself, best making it top to bottom, since I always pose the flaps that way with my papercrafts.
Start by making the 2 ears and glue together the whole head. Then start making the 4 paws separately, glue on the first few breast parts of the dog on the head, glue the front paws inside and make your way back to the back paws and glue those in. Now, make the 3D tail separately, and in the end, close the butt at the back and just slide the tail inside.
All you got to do is to cut out the 2D bell + collar to glue in around its neck and cut out the 2D bones, and the shiba inu diorama is done.
***************************************
*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:
https://ko-fi.com/s/98a0fa5d93
You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts ***
*********************
I hope you like this little Shiba cutie and you make your own version of it.
Enjoy and happy crafting~
No comments:
Post a Comment