Gecqua (Pokemon WW) built papercraft

Gecqua (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed water starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Gecqua-Pokemon-WW-papercraft-1304593864

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the snout first, and build the eyes around it. Glue on the rest of the head, till you have the whole head. Add the 2D eyelashes on its eyes (or do this at the end).

Next, start making the front torso part and glue it on the head, making sure to additionally put in some tape from the inside to make it hold better and that it doesn’t snap off, because the neck is very thin.

When you have the first half of the torso, set this aside and make the 4 3D legs and the 3D tail all separately first.

When you have those, glue the first 2 front feet inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back legs and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts and you are done.

The legs are thin, but because of the pose it doesn’t need any weights inside the legs because the head balances the whole figure, so it should be fine without them.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2d836afe6a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pombon (Pokemon WW) built papercraft

Pombon (Pokemon WW) built papercraft

For anybody living under a rock, POKEMON IS NOW IN ITS 10TH GEN RELEASE! Yes, we are getting gen 10 this year, at least the previews and some spoilers, and this is the conformed fire starter from the new Winds and Waves versions of the game I already made as a papercraft:

https://www.deviantart.com/antyyy/art/Pombon-Pokemon-WW-papercraft-1304595547

And since they are all so adorable, you get a preview assembly and building tips for it as well!

*********************************

ASSEMLBY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head, leave the hole for the snout and build the whole front part of the head. Now build the snout part separately and glue it inside the hole, so you can center it nice and smooth. Add the 2 small 2D teeth and tounge and glue on the front fur parts on as well.

Next, start making the back side of the neck with the back side of the fur parts. Glue the fur parts together, so the fur in the back and the front is touching.

When you have the first half of the body, set it aside and make the 4 3D paws and the 3D tail all separately first.

When you have those, glue the first 2 front paws inside the body, make the whole body till you have the butt part left. Now, glue on the remaining 2 back paws and then the tail, making sure to additionally attach and glue it with tape from the inside, so it doesn’t break off.

Once everything is nicely fit, close the butt part with the last 2 parts (Pro tip: Put some weights inside through the feet holes at the end at the back, if you want to make it stand better. It stands on its own, since 3 of his paws are on the bottom, but it can stand better that way) and you are done.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/545e777ad3

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Ms Wavychu (Pokemon WW) papercraft

Ms Wavychu (Pokemon WW) papercraft

Another Pokemon gen probably means another version of Pikachu in some kind of way, and with the short trailer reveal we actually got 2 of them! Both are not really peak Pikachu designs for me, because dressing up animals/Pokemon is just weird and torturous behavior, but with Pokemon it can somewhat seem cute and as if they themselves really like it. It is fictional after all ;9 While the “drunk uncle that’s always on vacations” aka Windychu looks really cringe for me XD the counterpart of the “fun aunt” aka Wavychu does look miles better and actually somewhat cute. So I decided to make it into a papercraft as well.

*******************

The papercraft consists of a Ms. Wavychu 3D model with add-on 2D clothes and the cap that are optional. The tail is also 2D 2-sided, so when assembling, you can put wire between them when you glue them together to make it a movable, posable part.

The clothes are best assembled partly separate from the Pikachu and then you just close the last few flaps on the model directly. The cap does come off, but if you want to make it not slip off and permanent, put glue on the edges where it hold onto both ears and that should fix it.

It is unfolded to 18 cm and has 6 pages to print.

***********************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3c6f6ee278

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************** 

Hope you like the design and that we get to see news for other stuff from the Winds and Waves games soon as well. I can’t wait to see more AND more new Pokemon in the new gen as well (:

Enjoy and happy crafting~

Browt (Pokemon WW) papercraft

Browt (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the grass starter called: Browt!

*********************************

The papercraft is unfolded to 14 cm and has 4 pages to print. It has a basic 3D model of Browt, with glue-on separate 3D wings and tail. The smaller parts are the slender legs, the beak and the crest on his head, else it is a pretty basic simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/b43186bb01

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pombon (Pokemon WW) papercraft

Pombon (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the fire starter called: Pombon!

*********************************

The papercraft is unfolded to 16 cm and has 4 pages to print. It has a basic 3D model of Pombon, with 2D 2-sided fur you glue together on both sides, and some fur 2D parts. The smaller parts would be the feet and ears, but all-in-all it is a pretty simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/545e777ad3

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Gecqua (Pokemon WW) papercraft

Gecqua (Pokemon WW) papercraft

So, the new gen10 preview trailer came out for the 30th Pokemon anniversary. Sooooo, I made a long all-nighter to be the very first to make the new released Pokemon Winds and Waves starters in 3D model and then papercraft form (:

And since all 3 of them are super cute and I like all of the designs (at least for now and what I seen, which is almost nothing XD), I decided to do all 3 of them. And here is the grass starter called: Gecqua!

*********************************

The papercraft is unfolded to 10 cm and has 3 pages to print. It has a basic 3D model of Gecqua, with 2D 2-sided feet and eyelashes. Since the feet are actually flat, it is a pretty simple assembly to make.

*NOTE: All 3 Winds/Waves starters are made to fit together in size, since I made them as a group.

**************

I have spent an UNGODLY amount of re-watching every millisecond of the trailer starter reveal to make these XD But since I only had the short trailer and the official artwork illustration (which is always different than the actual in-game models), the Pokemon designs are surely not 100% correct as they actually look and will look in the games that come out. I have made them based off what angles you see in the trailer and what I think they supposedly look like, so there are slight variations to the actual designs.

*******************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2d836afe6a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************************

Hope you like the new gen10 Pokemon game and fingers crossed its actually miles better than the last ZA crap they put out as well!

Enjoy and happy crafting~

Pokemon Wind/Waves starter papercrafts sneak peek

Pokemon Wind/Waves starter papercrafts sneak peek

Yesh, I am now officially the FIRST to make the papercrafts XD So, here are my dibs and confirmation.

I am making all 3 new starters of the new Winds and Waves 10th Pokemon generation that was officially confirmed yesterday in the 30th anniversary.

All 3 are super adorable, so I am furiously modeling these and texturing as we speak, so I can release them in the next few days to come 9;

Stay glued on the screens for more posts to come (: