Peakychu (Pokopia) built papercraft

Peakychu (Pokopia) built papercraft

Pokemon Pokopia is out, and I already made the Peakychu variant as a template:

https://www.deviantart.com/antyyy/art/Peakychu-papercraft-1264125375

And now you can also see the assembly preview and tips.

****************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso onto the pre-made head till you get the 2 holes for the arms, and glue those inside. Build the torso downwards a bit more till you are only left with the bottom part and the legs. At this point, make a small incision on the back side to stick the tail into the torso and glue the tail from the inside onto the torso with some tape, so it can move freely.

All that is left is to glue on the last bottom parts of the torso and when you have the 2 holes for the feet left, glue them inside. Close the whole craft with the soles of the feet (Pro tip: Put some weights inside through the feet holes at the end if you want to make it stand better) and it’s done.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/00158911c0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~