Peakychu (Pokopia) built papercraft

Peakychu (Pokopia) built papercraft

Pokemon Pokopia is out, and I already made the Peakychu variant as a template:

https://www.deviantart.com/antyyy/art/Peakychu-papercraft-1264125375

And now you can also see the assembly preview and tips.

****************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso onto the pre-made head till you get the 2 holes for the arms, and glue those inside. Build the torso downwards a bit more till you are only left with the bottom part and the legs. At this point, make a small incision on the back side to stick the tail into the torso and glue the tail from the inside onto the torso with some tape, so it can move freely.

All that is left is to glue on the last bottom parts of the torso and when you have the 2 holes for the feet left, glue them inside. Close the whole craft with the soles of the feet (Pro tip: Put some weights inside through the feet holes at the end if you want to make it stand better) and it’s done.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/00158911c0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Peakychu papercraft

Peakychu papercraft

Yes, yes I had to XD I have to be the first to make a design of a new Pikachu no matter what! :D

As you maybe seen in the news with the new Pokemon Pokopia game, they made a few new Pokemon designs and amongst them is a Pikachu ghost called Peakychu in English, or Usuchu in Japanese.

Let me be clear, I do not support Pokopia, nor will I endorse any further Pokemon games that are in the grip of the cold dead capitalist hands of Nintendo, but Pokemon as a concept are still very near and dear to me and I just love their deisngs and ideas, not to mention the peak 2DS and 3DS Pokemon games they made for them!

****************

The papercraft is unfolded to 15 cm and has 4 pages to print out.

It is based off the illustration of the new Peakychu design and not the actual 3D model of it, since I find the reference image to be much cuter than the actual model in the game.

It is a really simple design of a 3D Pikachu, that also has a 2D 2-sided tail at the back and you can choose for it to be female or male. Best to attach the tail with actual wire after you make the whole base model, so you can also move the tail around and pose it like that.

**************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

 https://ko-fi.com/s/00158911c0

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~