Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck + the fluff on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 front and 2 back feet separately. Make the 3D tail as well, since you can just attach it later on.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 back feet you made before and build the torso around those and when you put together the hole for the tail, attach that inside it first. Then you can glue on the front holes for the front legs and glue those 2 inside.

Now, before you do anything else: glue the tail inside the torso by adding extra stripes of tape inside the tail and torso where its glued together, because it can snap off very easily and you need to reinforce that part. Also, because it’s in a sitting pose, you don’t need to put in extra weights, since it sits on its own just fine.

When the whole torso is done, you can glue the head onto the torso where the frills/fur is.

At the end, you glue on the various bows and flowers on it and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Eevee & Pikachu, since they are meant as a set and fit together in size as well. You can find Pokepark Pikachu here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 feet you made before and build the torso around and upwards. Once you come to the holes for the arms, also glue those inside.

Now, before you do anything else 2 things to do: 1. glue the tail inside the torso by making an incision at the back and gluing it with tape on the inside. If you did as I did, you’ll be able to move the tail with the wire that way as well. 2. You put some weights inside the torso to make the Pikachu stand better (Pro tip: I always use small pebbles, since they are small to fit inside any holes you have and also heavy enough to make it heavier to stand. They are also light enough at the same time to not damage the paper when you do put them in.

When the whole torso is done, make the sleeveless jacket and put it around his arms and then glue it with a few dots at the front to make it hold its place. Now you can glue the head onto the torso where the frills are.

At the end, you glue on the various bows and flowers on it and glue on the hat as well and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Pikachu & Eevee, since they are meant as a set and fit together in size as well. You can find Pokepark Eevee here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu papercraft

Pokepark Kanto Pikachu papercraft

As you maybe heard there is a new “Pokepark Kanto” park opening in February 2026 in Japan. And for this occasion, as they always do, they decided on 2 mascots for the park, those being Pikachu and Eevee in really cute and adorable outfits for the park. Aaaand because you can never have too much Pokemon papercrafts out there, I decided to make them both into a papercraft (:

***********************

The papercraft is unfolded to 17 cm and has 4 pages to print out. It consists of a base stylized 3D Pikachu model, with various add-ons. It has a simple hat, a lot of 2D flowers and bows, his sleeveless coat and the tail is also 2D and 2-sided.

For the assembly, I do suggest adding wire inside the 2 tail sides, so you can actually pose and move the tail in the end. And it will hold upward better as well.

*Both Pokepark Kanto Pikachu and Pokepark Kanto Eevee are made the same height, so they fit together as a pair.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Eevee papercraft

Pokepark Kanto Eevee papercraft

As you maybe heard there is a new “Pokepark Kanto” park opening in February 2026 in Japan. And for this occasion, as they always do, they decided on 2 mascots for the park, those being Pikachu and Eevee in really cute and adorable outfits for the park. Aaaand because you can never have too much Pokemon papercrafts out there, I decided to make them both into a papercraft (;

***********************

The papercraft is unfolded to 16 cm and has 4 pages to print out. It consists of a base stylized 3D Eevee model, with various add-ons. It has a lot of simple 2D flowers and bows and its fluffy mane is also 2D and simply added in between the assembly when you make the head and body. The tail is 3D and connected to the body, so it will stand firmly.

*Both Pokepark Kanto Pikachu and Pokepark Kanto Eevee are made the same height, so they fit together as a pair.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~