Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee built papercraft

Pokepark Kanto Eevee has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck + the fluff on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 front and 2 back feet separately. Make the 3D tail as well, since you can just attach it later on.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 back feet you made before and build the torso around those and when you put together the hole for the tail, attach that inside it first. Then you can glue on the front holes for the front legs and glue those 2 inside.

Now, before you do anything else: glue the tail inside the torso by adding extra stripes of tape inside the tail and torso where its glued together, because it can snap off very easily and you need to reinforce that part. Also, because it’s in a sitting pose, you don’t need to put in extra weights, since it sits on its own just fine.

When the whole torso is done, you can glue the head onto the torso where the frills/fur is.

At the end, you glue on the various bows and flowers on it and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Eevee & Pikachu, since they are meant as a set and fit together in size as well. You can find Pokepark Pikachu here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu built papercraft

Pokepark Kanto Pikachu has already been released:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Pikachu-papercraft-1275941673

so now you can also see the assembled version with the building tips.

***********************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck. Don’t forget to attach the frills of the neck on here as well, since you can then just close the body with it later on.

When you have the head, make the 2 arms and 2 legs separately. Make the 2D tail as well (Pro tip: You can put some wire inside the tail before you glue both parts together, so it can stand better and it can be posed as well) and set all of these aside for later.

Now start assembling the torso. Since we have the frills on the neck, the torso can be built completely separately from the head. Start from bottom to top then. Get the 2 feet you made before and build the torso around and upwards. Once you come to the holes for the arms, also glue those inside.

Now, before you do anything else 2 things to do: 1. glue the tail inside the torso by making an incision at the back and gluing it with tape on the inside. If you did as I did, you’ll be able to move the tail with the wire that way as well. 2. You put some weights inside the torso to make the Pikachu stand better (Pro tip: I always use small pebbles, since they are small to fit inside any holes you have and also heavy enough to make it heavier to stand. They are also light enough at the same time to not damage the paper when you do put them in.

When the whole torso is done, make the sleeveless jacket and put it around his arms and then glue it with a few dots at the front to make it hold its place. Now you can glue the head onto the torso where the frills are.

At the end, you glue on the various bows and flowers on it and glue on the hat as well and it’s done.

*Note: In the preview I did put a picture of both Kanto Pokepark Pikachu & Eevee, since they are meant as a set and fit together in size as well. You can find Pokepark Eevee here:

https://www.deviantart.com/antyyy/art/Pokepark-Kanto-Eevee-papercraft-1273388164

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Pikachu papercraft

Pokepark Kanto Pikachu papercraft

As you maybe heard there is a new “Pokepark Kanto” park opening in February 2026 in Japan. And for this occasion, as they always do, they decided on 2 mascots for the park, those being Pikachu and Eevee in really cute and adorable outfits for the park. Aaaand because you can never have too much Pokemon papercrafts out there, I decided to make them both into a papercraft (:

***********************

The papercraft is unfolded to 17 cm and has 4 pages to print out. It consists of a base stylized 3D Pikachu model, with various add-ons. It has a simple hat, a lot of 2D flowers and bows, his sleeveless coat and the tail is also 2D and 2-sided.

For the assembly, I do suggest adding wire inside the 2 tail sides, so you can actually pose and move the tail in the end. And it will hold upward better as well.

*Both Pokepark Kanto Pikachu and Pokepark Kanto Eevee are made the same height, so they fit together as a pair.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/e0cb4d9a4e

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Pokepark Kanto Eevee papercraft

Pokepark Kanto Eevee papercraft

As you maybe heard there is a new “Pokepark Kanto” park opening in February 2026 in Japan. And for this occasion, as they always do, they decided on 2 mascots for the park, those being Pikachu and Eevee in really cute and adorable outfits for the park. Aaaand because you can never have too much Pokemon papercrafts out there, I decided to make them both into a papercraft (;

***********************

The papercraft is unfolded to 16 cm and has 4 pages to print out. It consists of a base stylized 3D Eevee model, with various add-ons. It has a lot of simple 2D flowers and bows and its fluffy mane is also 2D and simply added in between the assembly when you make the head and body. The tail is 3D and connected to the body, so it will stand firmly.

*Both Pokepark Kanto Pikachu and Pokepark Kanto Eevee are made the same height, so they fit together as a pair.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/39d544608a

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like stylized Pokemon they are using as the mascots. I think they are all too adorable, but that’s just me XD

Enjoy and happy crafting~

Abby (Wuthering Waves) papercraft commission

Abby (Wuthering Waves) papercraft commission

Well, didn't think I would post anything from WW anytime soon, but this is how it sometimes goes XD The commissioner wanted to have a life-size Abby mascot papercraft, so here we are.

********************

Since it is unfolded to 43 cm tall, it' is a completely new 3D model I had to make. The textures are still made with the reference of the official model, but it has more details/polygons in the model itself, the earrings are actually 3D and slide-on for the ears, and it has 2 different poses for the feet, so it can stand or float.

Also, as you can see, the paws are differently posed, more detailed, the fluff on the head is 3D, the necklace is 3D and the expression is a different one than the paid papercraft I made.

****************************************

*** This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

********************

For the actual smaller papercraft of Abby I have already made and am selling, you can view it here:

https://www.deviantart.com/antyyy/art/Abby-Wuthering-Waves-papercraft-1073674987

****************************************

Hope you like the new mascot and happy crafting~

Abby (Wuthering Waves) papercraft

Abby (Wuthering Waves) papercraft

Since the gacha-game “Wuthering Waves” released a new pet in the story, I loved this little cutie. And since I loved it so much and I think it’s super adorable, I decided to make a papercraft out of Abby as well and here is the release.

**********************************************

The papercraft is unfolded to 17 cm and has 4 pages to print. It consists of a 3D model of Abby, which I modeled and textures with the references from the game, as well as some smaller 2D add-ons, such as the earrings and the fluff.

Abby is floating in the game all the time, but obviously you can’t do that in real-life, so I decided to rather make it stand and do the cute demanding boss pose like that. The smaller parts would be the hands and the feet, but the included PDO should be able to tell you exactly how to put it together anyway. So, no worries about that. AND it’s super cute when assembled, so worth the work to build it :)

***********************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/0a0d51c5fb

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

************************

Hope you like the new mascot they have and happy crafting~