Hinawa chibi (Fire Force) papercraft

 Hinawa chibi (Fire Force) papercraft

Decided to do a whole range of chibi papercrafts fitting in a whole project, since I love making chibis ‘coz they are so adorable and easy to make. So, what else to do than one of my favorite series of the last 10 years, “Enen no Shouboutai” or “Fire Force” :)

As you can see from the preview image, this is the chibi papercraft of Hinawa, the hat guy XD also he is super creepy at times, which makes him funny at the same time :D

The papercraft is unfolded to 21 cm and consists of 7 pages to print. It is made out of a 3D Hinawa model, with simple 2D 2-sided hands that are just glued on like that for super simple assembly. He has some additional 2D parts as highlights on the model, such as the badge on the left shoulder and his 2D 2-sided collar with hoodie. It also comes with his gun he uses in his fights, which is made as a simple 3D boxy model that is built separately and glued into the hand.

Along with that, I have also updated my unfold patterns to be even more logical on how and what parts to put together, so the templates come not only with the edge ID PDF files to see how to assemble them, but also with written notes and clues on what parts go together, written besides the relevant parts in the templates. Even simpler assembly, and a simple 3D chibi pattern for easy gluing together.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

All of the chibis from the “Fire force” project, are made to fit together in a whole group, so they are all relative in height and basically made the same way. So, if you are interested in seeing all of them, just check the regular updates and my papercraft folder under “Fire Force papercrafts”, where all of them are going to be shown ;)

Happy crafting~ and "Latom!"

Iris chibi (Fire Force) built papercraft

Iris chibi (Fire Force) built papercraft

Time for yet another assembled papercraft of one of the best anime in the last few years “Enen no Shouboutai”. And next in line is the more-or-less spiritual leader of the bunch, the cute nun Iris, in chibi form of course, because they are sooo much adorable that way (and easier to make), don’t you think? XD


As with all my crafts, I always start at the head. Build the face first (with the neck) and then make your way to the back of the head with the hair and close it. Since Iris is in the nun’s uniform, she has a long veil down her head that is as long as her whole body, so that can be a bit fiddly to put on. But I still recommend you put the veil on the head separately, and then glue the head on with the veil, since it’s still going to be the easiest way if you do it like that. So, build the veil part, attach the inner side of the veil (if you want, since the inner part is optional, but it looks nicer in black), and then glue the front-end bangs of the hair on the vail. Once that is done, put glue on the flaps of the previously made head and glue the veil on the head, slowly and neatly, one flap at a time. The most important parts are the front parts, since those are visible, so make sure to focus on that, the back parts can be glued on just like that so they fit and they are aligned (since they are not visible in the end). And the head is done.

Moving on, I made the 2 arms separately first. After you have only the arms done, glue the “stumps” inside the arms at the right angle. And after those are glued, you can glue on the simple 2D 2-sided hands on and bent/curl the fingers in her typical “Latom” prayer pose (as seen in the picture) and we are done here :)

When the arms are done, built the first half of the upper dress with the collar. Build the gray collar first, then glue the white collar inside the gray collar and then on the collar of the black dress. When you got that, glue the arms on there and then slide the neck part (of the built head) inside the hole and glue it up from the inside. Let that part dry good, and when it does, use curled-up waste paper to bulk up that tiny neck of his to prevent it from snapping (it’s a chibi papercraft, so the necks are always the most difficult part, since they are so small and the head disproportionately big).

After that, built the remaining upper black dress parts and glue it on the pieces you already got. Once you have that, you can make the inner white dress and just glue it from the inside to the black dress at the right angle.

Once you got that, move on to the legs. The legs can be assembled separately from the main body, since they fit inside the dress and it’s easier that way, so do just that. Built the feet from the bottom upwards, first making the boots and make your way up till you reach the last part. In this phase you can fill out or add weights into the feet (if you want to be 100% sure it stands), but she stands pretty good without any help as well. And after you are happy with the feet, simply paste glue on the flaps and glue them on the body at the waste part, adjusting the right angle so she can stand.

Finishing touches are the shoulder pads of her protective gear. Those are glued together separately, and then you put some glue on each edge of the pads and glue them on the shoulders just like that at the right spots. And there you go, all done :)

She is pretty sturdy for a chibi papercraft, if you assemble her right. The neck is “hidden” inside the collar, making the most vulnerable part (the neck) pretty stiff, even without extra reinforcing it.


I hope you like her and you’ll get some ideas to assemble a papercraft or two on your own. The template and info about the purchase can be found here:

https://www.deviantart.com/antyyy/art/Iris-chibi-Fire-Force-papercraft-884729822

As always, just sent a private note/message if you want to buy it. In any case, happy crafting~ and "Latom!"

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Iris chibi (Fire Force) papercraft

Iris chibi (Fire Force) papercraft

Decided to do a whole range of chibi papercrafts fitting in a whole project, since I love making chibis ‘coz they are so adorable and easy to make. So, what else to do than one of my favorite series of the last 10 years, “Enen no Shouboutai” or “Fire Force” :)

As you can see from the preview image, this is the chibi papercraft of Iris, the gentle soul and spiritual beacon of the group XD

The papercraft is unfolded to 20 cm and consists of 9 pages to print. It is made out of a 3D Iris model, with simple 2D 2-sided hands that are just glued on like that for super simple assembly (posed with her praying “Latom”). She has some additional 2D parts as highlights on the model, such as her long 2-sided veil and her simple shoulder pads, that are just glued on like that.

Along with that, I have also updated my unfold patterns to be even more logical on how and what parts to put together, so the templates come not only with the edge ID PDF files to see how to assemble them, but also with written notes and clues on what parts go together, written besides the relevant parts in the templates. Even simpler assembly, and a simple 3D chibi pattern for easy gluing together.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

All of the chibis from the “Fire force” project, are made to fit together in a whole group, so they are all relative in height and basically made the same way. So, if you are interested in seeing all of them, just check the regular updates and my papercraft folder under “Fire Force papercrafts”, where all of them are going to be shown ;)

Happy crafting~ and "Latom!"

Arthur chibi (Fire Force) papercraft

Arthur chibi (Fire Force) papercraft

Decided to do a whole range of chibi papercrafts fitting in a whole project, since I love making chibis ‘coz they are so adorable and easy to make. So, what else to do than one of my favorite series of the last 10 years, “Enen no Shouboutai” or “Fire Force” :)

As you can see from the preview image, this is the chibi papercraft of Arthur, the crazy yet lovable guy with the knight-complex XD

The papercraft is unfolded to 24 cm and consists of 7 pages to print. It is made out of a 3D Arthur model, with simple 2D 2-sided hands that are just glued on like that for super simple assembly. He has some additional 2D parts as highlights on the model, such as the badge on the left shoulder and his 2D 2-sided collar with hoodie. It also comes with his Excalibur sword he uses in his fights, which is made as a simple 3D boxy model that is built separately and glued into the hand.

Along with that, I have also updated my unfold patterns to be even more logical on how and what parts to put together, so the templates come not only with the edge ID PDF files to see how to assemble them, but also with written notes and clues on what parts go together, written besides the relevant parts in the templates. Even simpler assembly, and a simple 3D chibi pattern for easy gluing together.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

All of the chibis from the “Fire force” project, are made to fit together in a whole group, so they are all relative in height and basically made the same way. So, if you are interested in seeing all of them, just check the regular updates and my papercraft folder under “Fire Force papercrafts”, where all of them are going to be shown ;)

Happy crafting~ and "Latom!"

Shinra chibi (Fire Force) built papercraft

Shinra chibi (Fire Force) built papercraft

Since I released/will release a whole range of “Enen no Shouboutai” chibi papercrafts, I also got to built at least some of them XD So I decided to start with the main character of the anime, Shinra in his cutish chibi form.

As with all my crafts, I always start at the head. Built the face first (with the neck) and then make your way to the back of the head with the hair and 2D 2-sided hair, gluing it where it is shown in the templates. Since the 2-sided hair parts are meant to cover-up white surface, I suggest you first glue the front part of the hair and then close it at the back with the other part, so the white flaps will be between the glued together parts and they will be covered up like that. That way the head will look nice and clean. And once you get to the back, just close it with the last piece, helping yourself with the hole in the neck part, if necessary, and the head is done. All there is left are the 2 2D 2-sided ears you glue on the right sports and the head is done.

Moving on, I made the 2 arms separately first. After you have only the arms done, glue the “stumps” inside the arms at the right angle. And after those are glued, you can glue on the simple 2D 2-sided hands on and bent/curl both thumbs and index fingers to his “concertation pose” he does with his hands when he wants his extra powerful fire attack move (see my reference picture above so you know what I mean), and those are done :)

When the arms are done, built the first half of the jacket with the collar. When you got that, glue the arms on the jacket and then slide the neck part (of the built head) inside the hole and glue it up from the inside. Let that part dry good, and when it does, use curled-up waste paper to bulk up that tiny neck of his to prevent it from snapping (it’s a chibi papercraft, so the necks are always the most difficult part, since they are so small and the head disproportionately big).

After that built the remaining jacket part and then move on to the legs. The legs can be assembled separately from the main body, since they fit inside the jacket and it’s easier that way, so do just that. Built the feet from the bottom upwards, first making the boots and make your way up till you reach the last part. In this phase you can fill out or add weights into the feet (if you want to be 100% sure it stands), but he stands pretty good without any help as well. And after you are happy with the feet, simply paste glue on the flaps and glue them on the body at the waste part, adjusting the right angle so he can stand, and there you go.

All that is left is to make the last parts, which are his decorative flame parts on his feet. They are simple 2D 2-sided parts, so when you glue them together, bend them in the middle and just put them beneath his feet as they can stand like that (or glue them on the soles of the feet if you want). And we are done.

He is pretty sturdy for a chibi papercraft, if you assemble him right. The neck is “hidden” inside the collar, making the most vulnerable part (the neck) pretty stiff even without extra reinforcing it.

I hope you like him and you’ll get some ideas to assemble a papercraft or two on your own. The template and info about the purchase can be found here:

https://www.deviantart.com/antyyy/art/Shinra-chibi-Fire-Force-papercraft-882640050

As always, just sent a private note and let me know if you would like to buy it. In any case, happy crafting~ and "Latom!"

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

Shinra chibi (Fire Force) papercraft

Shinra chibi (Fire Force) papercraft

Decided to do a whole range of chibi papercrafts fitting in a whole project, since I love making chibis ‘coz they are so adorable and easy to make. So, what else to do than one of my favorite series of the last 10 years, “Enen no Shouboutai” or “Fire Force” ;)

As you can see from the preview image, this is the chibi papercraft of Shinra, the main character of the bunch and one of the best “demonic” characters out there with that iconic grin of his XD

The papercraft is unfolded to 21 cm and consists of 6 pages to print. It is made out of a 3D Shinra model, with simple 2D 2-sided hands that are just glued on like that for super simple assembly. He has some additional 2D parts as highlights on the model, such as the badge on the left shoulder and his 2D 2-sided collar. It also comes with his typical 2D 2-sided flames that he shoots out of his feet, that are just cut out and glued on his feel (optional).

Along with that, I have also updated my unfold patterns to be even more logical on how and what parts to put together, so the templates come not only with the edge ID PDF files to see how to assemble them, but also with written notes and clues on what parts go together, written besides the relevant parts in the templates. Even simpler assembly, and a simple 3D chibi pattern for easy gluing together.

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

All of the chibis from the “Fire force” project, are made to fit together in a whole group, so they are all relative in height and basically made the same way. So, if you are interested in seeing all of them, just check the regular updates and my papercraft folder under “EnEn no Shouboutai papercrafts”, where all of them are going to be shown + I might even have 1 or 2 of them assembled and ready to show by then :)

Meganium (Pokemon) papercraft commission

Meganium (Pokemon) papercraft commission

Another papercraft commission I can share openly with all of you. This time it's an amazing life-like Meganium papercraft, inspired by the glowing Pokemon in the popular game »Pokemon Snap«.

The 3D model and the textures of the papercraft is modeled after the ones in the Sun & Moon version, since those were the latest ones with this Pokemon in it. It’s unfolded to 40 cm and consists of the 3D model of Meganium, the 2-sided petals around the neck to make them look realistic (and that are glued on the neck part of the craft) as well as 2 different versions of the antennae: one 3D version that is harder to make and that is attached directly on the head, and one simpler 2D 2-sided version that is just glued on like that. – And, of course, 2 different textures, normal and shiny, as are most when commissioning a Pokemon papercraft.

Hope you like it and that you’ll get some motivation to make a papercraft or 2 on your own ;) 

Enjoy and happy crafting~

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433***

Kocho Shinobu (Kimetsu no Yaiba) FREE papercraft

Kocho Shinobu (Kimetsu no Yaiba) FREE papercraft

As you maybe saw, I posted a commission of "Kocho Shinobu" that I made not s long ago. And as you also maybe saw, it already got assembled in the most fabulous way as well:

https://www.deviantart.com/amber2002161/art/Shinobu-Kocho-papercraft-879836934

AND as you can see now, the papercraft commission is now also available to download for FREE, thanks to the commissioner ;)

Unfolded to 30 cm, the papercraft consists of a 3D model of Shinobu, a separate 3D katana, a separate 3D stand, a 2-sided kimono built separately on her, some 2D accessories and some 2D 2-sided butterflies.

The files include 5 PDF files (lined and lineless, with and without colored flaps, as well as the edge ID for assembly with numbers) + the locked PDO for better assembly - and a warning for people that want to re-sell the thing, because I am sure it will get re-sold online soon, so be careful of scammers and thieves!

The file will always be FREE and will be freely downloadable on all my sites till the end of time!

Download simply by clicking the link here (along with all of my other FREE papercrafts):

https://www.patreon.com/antyyyspapercrafts


 
Do make your own version, spread the love and show some finished pictures of her when you do. Enjoy and happy crafting~

 

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Gigantamax Pikachu (Pokemon) FREE papercraft

Gigantamax Pikachu (Pokemon) FREE papercraft

As you people might have seen quite some time back, I made a huge Gigantmax Pikachu papercraft commission. And with this day on, you can also download it and make for yourself! The awesome "GUMY Art" (who was the commissioner and who's picture I took as the preview) has made this huge monster into a LED-lamp! You definitely want to see his work. You can check out his pictures on here: https://www.instagram.com/gumy.art/ And, of course, he made an assembly video of the whole project, so you can help yourself with your own assembly that way. Check it out: https://www.youtube.com/watch?v=xR-Zbp0uGW0&ab_channel=GUMYArt The file consists of 10 PDF files (lined and lineless, with and without colored flaps as well as the edge ID) for the normal and the shiny version, as well as with the locked PDO file to help your with the assembly as well. It is unfolded to 70 cm, so it's got quite some pages to print ;) You can download the files by simply clicking on the "download" icon bellow in the link (arrow pointing down). Additionally to that, you can also download it externally here (along with all of my other FREE papercrafts):

www.patreon.com/antyyyspapercrafts

I hope you enjoy it and I get to see some new Mega Pikachu crafts being made as well. Happy crafting~



***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art :)***

Sebastian (Kuroshitsuji - Black Butler) papercraft

Sebastian (Kuroshitsuji - Black Butler) papercraft

People. It has been too long. To damn freaking long, I know. I mean, who doesn't know the legendary anime »Kuroshitsuji« or »Black Butler«. You got quite some papercrafts to choose of Ciel out there, but the true main character of the anime, »Sebastian Michaelis« the black demon butler from hell, where is a craft of him?!??! I didn't see any being made all this time the anime came out. SO, IT IS TIME TO CHANGE THAT! May I present to you, finally, my own papercraft made of Sebastian. It’s never too late people XD

The papercraft itself is made by me, of course, 3D model, pose and texture (as always, 100% made by ME). It is unfolded to 30 cm height, since I wanted Sebastian to be really big and the center piece for anybody assembling him. The template consists of 7 pages to print out.

All in all, it’s a rather complicated papercraft to assemble, a lot of smaller pieces for the hands and the hair, so definitely nothing for beginners to make, and nobody that isn’t confident in their papercraft assembly skills.

The kuroshitsuji papercraft is made out of a joined 3D model of Sebastian, with the end part of the hair having a hole in it (in the head), for simpler assembly and to simply close off the head. The hole is of course not visible at the end. Some parts of the hair are in 2D and 2-sided, others are in 3D for a better effect. Apart from that, you also got some smaller 2D parts to just put on, as are his chains in the pocket and his crest on the jacket. And of course he is in his typical bowed down pose as he always is when taking orders from Ciel and saying “Yes, my Lord.” :}

***This is a premium papercraft that you need to purchase in order to receive the PDF and blank PDO files for assembly. – You can find all information about the PayPal purchase in the provided upper outgoing link.***

I hope you love him as much as I do and that I get some time on my hands to assemble him as well. I am a huge fan of the anime so I was really excited to make this, and I also hope we get some new material in any way as well XD Enjoy and as always: Yes, my Lord! and happy crafting~