Gengar Poke ball (Pokemon) papercraft

Gengar Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Gengar Poke ball design papercraft box. It is unfolded to 18 cm (12 cm of the actual Poke ball height) and has 4 pages to print out (all 4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/fe421dfcd8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Bob-ombette (Super Mario) papercraft

Bob-ombette (Super Mario) papercraft

Got into some Super Mario lore basically, and found some not-so-well-known and more-known OC characters from the universe. So, I decided to make some of them into papercrafts, the ones I liked really, and make them the way I think they look cutest.

**************

The papercraft is unfolded to a height of 27 cm and has 5 pages to print out. The Bob-ombette (or princess Bob-ombette aka Bumuhei-hime) is made as a basic 3D model, with simple separate 2D front and back hair, optional 3D or 2D hands and a windup key, some simple 2D flat add-ons (the bomb fuse, the ears), her 3D crown, and a simple 3D bob-omb in her hands as an optional piece.

She stands with the bent pose, but the feet really need to be additionally filled with weights so she holds upright and doesn’t tilt over.

The fiddly part would be the 3D hands and the 3D windup key option that is just glued on the back as a whole part.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/61956331da

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like my vision of her and how I think she looks the most adorable. Enjoy and happy crafting~

Love ball (Pokemon) papercraft

Love ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Love ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/32bee049d4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Ranger Kate (Pokemon) papercraft

Ranger Kate (Pokemon) papercraft

As most of you know, the Switch 2 got announced and one of the most exciting features and add-ons it showed was an actual screen, that lets you transform the Switch into a 3DS console again! I was super hyped about this, and since I felt so nostalgic, I had to replay a classic Pokemon Ranger game for my old trusty 3DS: Pokémon Ranger: Shadows of Almia!

Really miss the 3DS-style double-screen + touchscreen games, so I had to replay this little cute game, and I almost never do replays on any games I played before. These classic 3DS games just have a very special place in my heart… Anyway, since I did replay it all over again, I decided to do the old characters in the game justice and make my female character into a stylized modern Pokemon ranger. So, here she is, a modern re-take of Ranger Kate and how I think she would look like in 2025 (:

**************

The papercraft is unfolded to 24 cm height and has 4 pages to print out.

The papercraft consist of a basic 3D model of Kate, with 3D pointy tails, optional 3D or 2D hands, her 2D styler, and 2D add-ons, such as the jacket, the belt with the styler holder and some accessories on the shoes.

Overall the 2 tails take a bit longer to make, since they are 3D and each of the pointy ends has to be glued separately, but a very simple human papercraft all-in-all, especially if you hate making 3D hands (like me XD) and just use the 2D version ones – life is too short to make actual 3D hands on papercrafts people, go out and frolic in the grass and fresh air a bit more

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/fc85f59602

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. As said, it is top ranger Kate, but stylized in my own modern take of her, so not a carbon-copy of the actual character in the game.

Enjoy and happy crafting~

Level ball (Pokemon) papercraft

Level ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Level ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/ea1350e6b8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Piranhette (Super Mario) papercraft

Piranhette (Super Mario) papercraft

Got into some Super Mario lore basically, and found some not-so-well-known and more-known OC characters from the universe. So, I decided to make some of them into papercrafts, the ones I liked really, and make them the way I think they look cutest.

**************

The papercraft is unfolded to a height of 22 cm and has 6 pages to print out. The Piranhette (also called Princess Piranha Plant) is made as a basic 3D model, with simple separate 2D front and back hair, optional 3D or 2D hands, some simple 2D flat add-ons, her 2D crown with a 3D jewel, and 1 layer of the dress.

She stands on both feet, but she has very high heels on, so you should definitely add additional weights inside the legs when you assemble her so she can stand. Additionally to that, you can also add in magnets or wire to do so, as you wish.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/2e0aa4b5f4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like my vision of her and how I think she looks the most adorable. Enjoy and happy crafting~

Snorlax Poke ball (Pokemon) papercraft

Snorlax Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Snorlax Poke ball design papercraft box. It is unfolded to 17 cm (12 cm of the actual Poke ball height) and has 4 pages to print out (all 4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/79fe113dc9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Timer ball (Pokemon) papercraft

Timer ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Timer ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/35a9d05394

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Boosette (Super Mario) papercraft

Boosette (Super Mario) papercraft

Got into some Super Mario lore basically, and found some not-so-well-known and more-known OC characters from the universe. So, I decided to make some of them into papercrafts, the ones I liked really, and make them the way I think they look cutest.

**************

The papercraft is unfolded to a height of 22 cm and has 6 pages to print out. The Boosette (also called Booette or Queen Boo) is made as a basic 3D model, with simple separate 2D front and back hair, optional 3D or 2D hands, some simple 2D flat add-ons (the 2 boos as optional images in the background you can glue somewhere on the wall she will stand in front of, for instance), her 2D crown with a 3D jewel, and 2 layers of the dress.

She stands on both feet, but she has very high heels on, so you should definitely add additional weights inside the legs when you assemble her so she can stand. Additionally to that, you can also add in magnets or wire to do so, as you wish.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/19ea395a5b

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like my vision of her and how I think she looks the most adorable. Enjoy and happy crafting~

Mualani (Genshin Impact) built papercraft

Mualani (Genshin Impact) built papercraft

Already posted my Mualani papercraft template:

https://www.deviantart.com/antyyy/art/Mualani-Genshin-Impact-papercraft-1120878123

And now it’s time to assemble her and give you some pro-tips on how to make life simpler for yourself when doing these. Let’s go.

**********************************************************

ASSEMBLY TIPS:

 With any of my papercrafts, you can divide the assembly into separate parts: the head with the hair, the 2 arms, the torso with the arms, the various add-on ribbons and the 2 3D maracas, and the legs with the shoes.

If we start with the head, you assemble the face and neck first. Then you glue on the front hair, and lastly close it with the back hair. After this, you can glue on the hair tail on the top head.

Next you can separately build the 2 arms, with either the 2D or 3D hands (note that I did the preview pics with the 2D version of the hands). When you got those, set them aside and start gluing together the torso at the neck, and when you come to the shoulders, glue those on. When you have the torso glued together to the bellybutton, set this part aside.

Next step is to make the legs. You do this part by assembling the legs from bottom to top and finish with the buttocks part. This means, build the shoes first, set aside, and start gluing the leg from the soles and feet upwards, till you make both legs separatrely. And after this, glue the legs on the remaining butt parts and then glue the feet inside the shoes.

And before anything, fill up the legs with some weights here, to make her really stand firmly (*Pro-tip 2: I always suggest smaller pebbles, since they are small enough to fit and heavy enough to help with the weight as well, without rupturing the paper itself).

Next, glue these parts now together. Glue the legs’ part inside the bellybutton torso part, making sure to glue them at the right angle, so the figure can stand comfortably.

Now you have the remaining 2D and 3D parts to glue on, which you all make separately and glue on at the right place and the right angle. Make sure to leave the 2 2D 2-sided braids till the very end, so they are not in the way and you can manipulate them into standing at a right angle. Additionally, you can *pro-tip 2: glue wire on one side of the braid before closing it with the other side, so the wire is sticking out the braid at the top and you can glue that part inside the head to pose the braids into standing the way you want.

*Note: The papercraft preview is made with 2D hands. The files for printing-out have both the 2D and 3D hand versions, so you can choose which ones to make.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c36821e9e4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like her as much as I do. I love the design they made for her soooo much XD my eternal Nr. 1 Genshin waifu!

Enjoy and happy crafting~