Akazukin ChaCha papercraft

Akazukin ChaCha papercraft

Waaaaay back in the days when I first started watching anime, Crunchyroll was still an actual usable platform that was free to watch and without ads. Ahhh, good ol’ days. Anyway, I watched stuff on the site and thanks to Crunchy I got into this super cute and funny anime called “Akazukin ChaCha” or “Red riding hood ChaCha” and it’s a really stupid and lovably story about a little girl and her sensei and just all-around everyday chaos in magic land for them. It has everything, from slapstick comedy, to fighting, mahou shoujo transformation, friendship, adventure, isekai, romance, all of it and more. I love the series, because it’s super funny, and years later the same mangaka also had another work released into anime, called “Mahoujin guru guru”. Damn, these hit me right in my funny bone and I think they are super silly XD

Anyhow, since I was looking at some old anime I watched on my watch list, I did remember this old anime, and I wanted to make a cute little ChaCha papercraft of her to remember the series. And here it is.

******************

The papercraft is unfolded to 18 cm and has 4 pages to print (+2 being optional backside prints for the inner side of the hood and the dress). The template consists of a simple 3D model of ChaCha, with her 3D transformation brooch (that you can make a simple 2D version by just cutting out the front and backside) and optional 3D or 2D hands.  

The fiddlier parts would be the hair tails, since they are smaller, and the optional 3D hands.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/6201b83b33

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:
ko-fi.com/antyyyspapercrafts *** 

******************

Do give the anime (or manga) a watch, I am sure you’ll love it as much as me XD

Enjoy and happy crafting~

Lure ball (Pokemon) papercraft

Lure ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Lure ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/cc4a6fe97d

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Hex Maniac (Pokemon) papercraft

Hex Maniac (Pokemon) papercraft

On Pokemon Day a few days back, we finally got to see a real game-play trailer and some new info on the upcoming “Pokémon Legends: Z-A” game coming out at the end of this year. They have shown some new gimmicks, the returning starters, etc.

HOWEVER, what people got most excited about was, when they released a map with some illustrations of the city and lo and behold, who was on the illustrations that got the most attention out of the Pokemon fans? No other than the newly stylized “Hex Maniac” Pokemon trainer XD

I love her as well, not gonna, lie, so I had to do my best and turn this little few-inch big illustration that we got from her into a papercraft. And this is how I imagine her to look like (:

**************

The papercraft is unfolded to a height of 22 cm and has 5 pages to print out. She is made as a basic 3D model, with simple separate 2D front and back hair, optional 3D or 2D hands, some simple 2D flat add-ons and 2 layers of the dress.

One leg is slightly tilted to the back, since I wanted to make the same pose she is in the reference, but she has very big shoes, so standing isn’t a problem. You can add additional weights inside the legs when you assemble her, but she can stand on her own with ease.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/a27ae05506

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like my vision of her and how I think she looks like. I can’t wait to get some time to build her myself XD she is adorable.

Hope you look forward to the new Pokemon game and that we get to see a lot cooler snippets out of the game as well (and some new regional forms or mega evos as well? who knows…).

Enjoy and happy crafting~

MC Pikachu (Halloween) built papercraft

MC Pikachu (Halloween) built papercraft

I already posted the template of the “POKÉMON JUMPIN' HALLOWEEN PARTY” MC Pikachu:

https://www.deviantart.com/antyyy/art/MC-Pikachu-Halloween-papercraft-1115672802

And now you can also see the preview pics of the assembly (:

**************

ASSEMBLY TIPS:

As with all of my papercrafts, you start from top and build to bottom.

Assemble the 2 ears separately and then start making the top of the head, attach the 2 ears on and make the whole head to the edge of the neck.

Now since it has a jacket on, I suggest you first make the hoodie separate and glue that on the head. Then make the whole jacket part separately (including the sleeves with the hands) and then you glue the body shirt on the head at the front neck part. When you have the body shirt on, you glue on the pre-made jacket on the edge of the head. Next, put glue on the flaps of the body shirt parts where it touches the inner sleeves, and glue that on and then put glue on the remaining flaps of the inner edge where the body shirt and the jacket meet, and glue that on to get the body – with this method, although it sounds complicated, is less complicated and you can have that few millimeters margin of error to join them together as well, without the holes being noticeable if the edges don’t fit 100%.

Next, you glue on the leg/bottom part of the papercraft. Before doing anything, make the 2D 2-sided tail by putting in some wire inside it so it can hold and move at the same time. When you have the tail, make an incision line on the bottom part of the legs, so you can slide that wire inside the body and glue the tail from the inside of the body with strong tape.

When you got this, all you have to do is the 2 feet separately, and when you are done, slide them inside the 2 holes in the bottom with glue and attach them like that.

All that is left are the 2D parts of the jacket, the simple earphones that you can glue on by putting a bit of glue on the edge of each earphone and make the 3D optional stand and the MC Pikachu is done.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/bd89ced915

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like him and happy crafting~

Mimikyu Poke ball (Pokemon) papercraft

Mimikyu Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Mimikyu Poke ball design papercraft box. It is unfolded to 21 cm (16 cm of the actual Poke ball height) and has 4 pages to print out (all 4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/87604e93a6

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Hikari Gatomon pajamas (Digimon) papercraft

Hikari Gatomon pajamas (Digimon) papercraft

Recently a new set of super cute Digimon figures came out with the chosen children of the very first Digimon season, in which each of them wears super cute pajamas of their Digimon partners. They are super adorable, and I decided to make my own take on the figures and actually making accurate pajamas of them in papercraft form. And here they are.

This is the design of Hikari (Kari) in her Gatomon (Tailmon) pajamas.

*********************

The papercraft is unfolded to a height of 22 cm and has 5 pages to print out. It consists of 3D version of Hikari in her Digimon pajamas. It has a 3D head with 2D hair parts, 2D 2-sided ears, a 3D body with 3D paws and feet, a 2D hood with 3D ears, and a 2D 2-sided tail with the 2D ring.

For the assembly, you need to first assemble the hood and then the head, both separately. Once you have both, put the head inside the hood and glue those together with the flaps on the neck part of the body and only as the last part put together the body. Else the head cannot be put inside the hood, so the hood and head need to be assembled first.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/13e2603ed8

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

*Note that I made only a few of the tamers and my own version of the Digimon pajama designs as well. I did not make the whole set of all 8 children, nor will I do the whole set of them, since I only wanted to make my fav ones I liked from the anime.

Also note that the ones I did make are all in relative height and fit together in size.

***************************************

Hope you like the papercraft in any case. Enjoy and happy crafting~

Heavy ball (Pokemon) papercraft

Heavy ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Heavy ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4c7cb63df2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Gatomon and Patamon (Digimon) papercraft

Gatomon and Patamon (Digimon) papercraft

I got into the Digimon universe again and wanted to make an actual Digimon papercraft again of my fav ones, but this time 100% with my own model/texture (since I did start my career with some Digimon crafts I made, but they were based off of actual 3D models from the game, so I removed those).

So, I thought it would be nice group papercaft design to make Gatomon and Patamon, my 2 absolute fav, cutest, most adorable and awesome Digimon in season 1 and 2 combined XD Did I also mention they are both holy Digimon as well? So cute, with cool digivolutions AND awesomely powerful at the same time :3

*********************

The papercraft is unfolded to a height of 20 cm and has 8 pages to print out (for both of them together). It consists of a 3D Gatomon/Tailmon and a 3D Patamon.

The design/pose idea is from some recent chibi figurines of the Digimon series, so both of them sit on their little bums and are looking at each other adorably (:

Since they are sitting, they both stand and won’t tip over, so extra weight is not needed for the assembly. However, some parts may be a bit smaller to make, such as Gatomons ears/tail and Patamons fingers on his arms and legs.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/9852121bfd

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

Hope you like these 2 cuties as much as I do :3

Enjoy and happy crafting~

Parrot monitor sitter built papercraft

Parrot monitor sitter built papercraft

As you maybe remember, I have made a series of »monitor sitter« animal papercrafts that are basically papercrafts you can make to put on your flatscreens and have them there for decoration or moral support, if you will:

https://www.deviantart.com/antyyy/art/Parrot-monitor-sitter-papercraft-974857391

They fit on any flatscreen on your PC screen, laptop, kindle, tablet, smartphone and even on vases, boxes or jars with slimmer rims, so you can decorate whatever you want with them. But basically, I made them to fit my laptop, so I could wedge them on my own PC :3

And since I have finally had the time to assemble them, here are the preview pictures on how they look like built and some tips for anybody wanting to make them for yourself.

********************

ASSEMBLY TIPS:

Whatever animal you assemble from this series, they are basically made the same way: built from top to bottom.

Build the crest first (for the cockatiel version), build the beak separately, then the head, glue the pre-made beak inside the head, then the body, the 3D tail, and only after you have all of the body parts, take the inner clamp side, pre-bend it, put glue on the leftover flaps of the body, and slide & glue the clamp part inside the body and close it up that way. Lastly, you can glue on the 2D 2-sided wings and the 2D feet.

That’s how I made all of my crafts you see and this is probably the simplest way to get this done and assembled.

***

NOTE: The papercraft includes all 4 colors, the gray and light gray cockatiel and a green and blue budgie that you can choose or build all 4 of them.

*******************************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

ko-fi.com/s/b16f932023

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********************

I hope you like the cuties and you’ll give them a go as well.

Enjoy and happy crafting~

Friend ball (Pokemon) papercraft

Friend ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Friend ball design papercraft box. It is unfolded to 16 cm (11 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/fdbb8934ac

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Shampoo (Ranma 1/2) papercraft

Shampoo (Ranma 1/2) papercraft

As you maybe remember, I already did some older Ranma½ papercrafts in reference of the old 1989 anime. You can see the old designs I made in a preview here:

https://www.deviantart.com/antyyy/art/Ranma-1-2-papercraft-remakes-1146197007

And since the new remake anime came out, I decided to also remake my old papercrafts of the main characters in their glorious, fresh new looks!

***************

This is my new Shampoo papercraft from the anime Ranma½.

The papercraft is unfolded to 26 cm and has 5 pages to print out. The papercraft consists of a 3D model of Shampoo, a simple 3D model of Shampoo in her cat form, optional 3D and 2D hand versions and 3 simple ramen bowls full of ramen.

The papercraft stands on 2 feet, but it would be better to additionally reinforce the legs when assembled, so it can’t tip over that easily.

*NOTE: The papercraft was made before the new season remake could show the Shampoo cat design they are going to make, so I made the cat version based on how I think she will look, and not based on official releases, since they are not out yet.

***************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/361fa1f278

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

***************

Hope you like the new look of the papercraft and happy crafting~

Shy Gal (Super Mario) papercraft

Shy Gal (Super Mario) papercraft

Shy Gal is a cute little OC character from the Super Mario universe, basically a “rule 63” made-up female version of the Shy Guy mascot. And since I liked the gif and the drawn versions they made out of her all over the internet, I decided to partake in this and made my own papercraft figure version (:

********

The papercraft is unfolded to 20 cm and has 3 pages to print.

The base is a 3D model, with hollow sleeves, so there are no actual hands to make (yes!!! I hate assembling 3D hands so much XD) and the hair parts are 2D parts as well. The fiddly parts would be the high-heels she has and the hoodie, since you need to make the mask first and build the hoodie around it, since it has double-flaps to put together.

It does stand on both feet, but since the heels are very steep and because of the bent pose, I do suggest filling out the feet to make her stand better.

****************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/7d93f1bb94

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

********

Hope you like her and happy crafting~

Zubat Poke ball (Pokemon) papercraft

Zubat Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Zubat Poke ball design papercraft box. It is unfolded to 20 cm (12 cm of the actual Poke ball height) and has 5 pages to print out (all 5 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/06ffed5f71

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Ryoga (Ranma 1/2) papercraft

Ryoga (Ranma 1/2) papercraft

As you maybe remember, I already did some older Ranma½ papercrafts in reference of the old 1989 anime. You can see the old designs I made in a preview here:

https://www.deviantart.com/antyyy/art/Ranma-1-2-papercraft-remakes-1146197007

And since the new remake anime came out, I decided to also remake my old papercrafts of the main characters in their glorious, fresh new looks!

***************

 This is my new Ryoga papercraft from the anime Ranma½.

The papercraft is unfolded to 26 cm and has 5 pages to print out. The papercraft consists of a 3D model of Ryoga, a simple 3D model of Ryoga in his Pi-chan pig form, optional 3D and 2D hand versions and his simple 3D backpack and umbrella.

The papercraft stands on 2 feet, but it would be better to additionally reinforce the legs when assembled, so it can’t tip over that easily.

***************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/88ebe306c4

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

***************

Hope you like the new look of the papercraft and happy crafting~

Miko bikini girl OC papercraft commission

Miko bikini girl OC papercraft commission

Another sexy papercraft commission I can share the preview of. This is the so-called “Miko bikini girl” papercraft, an OC papercraft girl that was referenced by the 1 and only picture made of her. The picture is actually famous, because the bikini from the illustration was then actually made into a real-life bikini clothing that year. Pretty neat, huh?

The papercraft itself is unfolded to 30 cm and has 7 pages to print (5 of them being double-sided prints). It consists of a 3D model of the naked Miko girl, and then you have the add-on white Miko-inspired bikini with the red dress. The papercraft girl has detailed and full nude textures.

**************************************** 

***This is a paid commissioned papercraft. Commissioned crafts cannot be re-sold, with some exceptions. If you are interested in buying the template or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

*********************************** 

Enjoy and happy crafting~

Shiba Inu diorama built papercraft

Shiba Inu diorama built papercraft

Already showed you my template of Pochi (:

https://www.deviantart.com/antyyy/art/Shiba-Inu-diorama-papercraft-1150294831

And now comes the assembly and tips for the built, so you can make one yourself.

*********************

The papercraft has many different optional parts, so you make the diorama, the dog house, the bowl, the dog itself and the 2D bones all separately.

For the stand itself, you build it top to bottom, like you would make a 3D box and you close it with the bottom part. Then you take the 4 parts for the fence and *pro-tip: glue them on each other (before cutting them out) by overlapping the parts (you can do this best if you turn them to a light source or place it near a window, so you can partially see-though the paper and know where to glue to together) and only when they are glued together, cut them out. I do this with all of my 2D 2-sided parts I make, since it’s the easiest and most precise way to do this. It’s really easy, so try it out. When you have the fence, knick and fold the bottom part of the fence a bit, so you can glue it on the flat surface of the stand and there you go.

For the bowl, it’s easiest by gluing the 2 sides of the bow together first, and BEFORE you close the bottom, you slide the water part inside the bowl, put glue on the flaps of the water part, and jam it upwards right to the point where the water stands and let dry. Only then, close the bowl and it’s done.

The dog house is also simple to make, a box-pattern craft you do and at the end close with the bottom part. And when the base house is done, glue on the flat root on it.

For the dog itself, best making it top to bottom, since I always pose the flaps that way with my papercrafts.

Start by making the 2 ears and glue together the whole head. Then start making the 4 paws separately, glue on the first few breast parts of the dog on the head, glue the front paws inside and make your way back to the back paws and glue those in. Now, make the 3D tail separately, and in the end, close the butt at the back and just slide the tail inside.

All you got to do is to cut out the 2D bell + collar to glue in around its neck and cut out the 2D bones, and the shiba inu diorama is done.

***************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/98a0fa5d93

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

*********************

I hope you like this little Shiba cutie and you make your own version of it.

Enjoy and happy crafting~

Labubu FREE papercraft

Labubu FREE papercraft

Why am I only hearing about these ADORABLE little monsters now? XD damn, I'm old.

Anyway, apparently hugely popular a few months ago, I saw this to-die-for-cute designs of little monsters called Labubu. There are a few types, but apparently this smaller cutie without a tail is a Labubu. They remind me so much of the Moomins and Little My, I fell in love with the design as soon as I saw them!

So, why not make a simple papercraft design of them so everybody can enjoy their cute little grumpy faces? (:

****************************

The papercraft itself is unfolded to 17 cm and has 3 pages to print out. A basic, easy 3D model, with smaller 3-finger hands and pointy feet, but else very simple to make.

I also included the whole base pack of colors, so you have 6 colors included in the free download: the brown, the green, the pink, the blue, the light brown, and the gray one. Who is your favorite out of the bunch? Or are you going to make all 6 of them?

*To download, just follow my Patreon link bellow, find the Labubu post, and you’ll see the ZIP file at the end of the post. Click that and the download will start. You can do that 100% free, without needing any account, subscription or anything like that. Same goes for all of my FREE papercrafts I make and release. Easy as pie (:

**************

***This is a FREE papercraft that you can download for free on my Patreon page: https://www.patreon.com/antyyyspapercrafts.

If you assemble any of them, please share the finished papercraft pictures in a post, a shared link, a tag to my page, or send pictures to me, so I can post them on my page. I am always happy to see anybody assembling my art ***

****************************

Additionally to this, you can also view the 3D preview of the papercraft (same as it looks in the included PDO file) here:

https://sketchfab.com/3d-models/labubu-free-papercraft-142896d1f1e943299cefc1a827c7f271

**************

Hope you like them and I get to see it being made all over the net.

Enjoy and happy crafting~

Toravolt (Coromon) papercraft

Toravolt (Coromon) papercraft

Played a new Pokemon-based original game called “Coromon” and….. I…... LOVED IT!

It was such a nostalgic walk back to the real OG based pixel Pokemon games I loved on the old Nintendo consoles. They even made a Pokemon tribute in the game and made an Ash character NPC named “Asheton” XDDD he was so depressed the new tech in the Coromon universe is sooo better than in Pokemon, it was so funny XD such a cute easter-egg.

Anyway, the game itself is really addictive, the Coromon monsters are all super nicely designed, loved the old pixelated vibe, and the monsters with their types and attacks are actually very balanced, compared to other ROM-hack games made from Pokemon. I really liked it and I stayed engaged right to the very end.

And because I liked it so much, I had to make a Coromon monster design in 3D that I fell in love with the moment I saw it: Toravolt

**************

The papercraft is unfolded to 16 cm and has 6 pages to print. The whole thing is basically a 3D edgy tiger craft, with 4 3D paws, a spikey 3D tail, a lot of 3D spikes and 2D 2-sided spikes in the middle.

Best way to assemble it is to make it from head to tail, as with all of my papercrafts. You can easily close it then either with the paw bottoms or at the tail.

*Note: Coromon is a pixel-based game, so the 3D interpretation of Toravolt is not 100% accurate, since I made it in a design I found cool and to give it my own personal touch, since it’s my craft.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/4d0bbe6755

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. And if you are a fan of monster fighting games, you NEED TO PLAY IT, like right now! Now! Go buy it on Steam and play your little hearts out with it (: You’ll see you’ll love this one as much as I did.

Enjoy and happy crafting~

Fast ball (Pokemon) papercraft

Fast ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the Fast ball design papercraft box. It is unfolded to 16 cm (13 cm of the actual Poke ball height) and has 4 pages to print out (3 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/c4ac371cc2

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Female Ranma (Ranma 1/2) papercraft

Female Ranma (Ranma 1/2) papercraft

As you maybe remember, I already did some older Ranma½ papercrafts in reference of the old 1989 anime. You can see the old designs I made in a preview here:

https://www.deviantart.com/antyyy/art/Ranma-1-2-papercraft-remakes-1146197007

And since the new remake anime came out, I decided to also remake my old papercrafts of the main characters in their glorious, fresh new looks!

***************

 This is my new Female Ranma papercraft from the anime Ranma½.

The papercraft is unfolded to 24 cm and has 4 pages to print out. The papercraft consists of a 3D model of Ranma, optional 3D and 2D hand versions and her simple 3D bucket.

The papercraft stands on 2 feet, but it would be better to additionally reinforce the legs when assembled, so it can’t tip over that easily.

***************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/92665904d9

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

***************

Hope you like the new look of the papercraft and happy crafting~

Sir Aaron (Pokemon) 3D model commission

Sir Aaron (Pokemon) 3D model commission

Yeah, who knew. Antyyy’s Papercrafts is doing 3D model commissions as well. For quite some time now, actually. But whatever I did, the commissioners didn’t want it to be shared openly. But THIS TIME, I can show you what I can do with this mesh and polygons (;

************************************

The commission here was to make a “Sir Aaron” 3D model that can be used in Vroid (I think). Sir Aron, of course, being the main guardian that appeared as a flashback character in the Pokemon movie “Pokémon: Lucario and the Mystery of Mew”. A lovely movie, may I say myself ;_; and sad.

The base was modeled by me from his reference sheet of his ancestor “Riley”, which we know from the Diamond and Pearl Pokemon games, as well as his reference sheet from the movie.

The 3D model itself and all of the textures are made by me. The model is a basic low-poly 3D model and it has 8 UV-maps and textures for each part.

****************

As long as you are interested in a low-poly anime 3D model that is unrigged and without bones or animation, I am the place to do that for you (: And I quite enjoy them as well, because they are sooooo less complicated to make as papercrafts XD

************************************

***This is a paid commissioned 3D model. Commissioned models cannot be re-sold, with some exceptions. If you are interested in a purchase or have any other questions, please message me in private on DeviantArt or on my Facebook page.

If you are interested in a paid commission, or have any questions regarding my commissions and the general process, you can read about those here:

https://www.deviantart.com/antyyy/journal/Antyyy-s-Papercrafts-COMMISSIONS-860689433 ***

**************

Hope you like the design. The model will be rigged as well, so I asked to share some pics or videos how he looks in full action when it’s done as well. Hopefully I can share those on here when they are ready. 

Enjoy and happy crafting~

Eeveelution Poke balls (Pokemon) papercraft

Eeveelution Poke balls (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

These are the OC Eeveelution Poke ball design papercraft boxes. They are all unfolded to about 14 cm of the actual Poke ball height and have 5-6 pages to print out – depending on what Eeveelution you are making (5-6 of them being double-sided).

The preview picture shows the unfolded Poke ball templates that stand apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed previews and how they look, just so you know they are closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/33c03700dd

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Elekid Poke ball (Pokemon) papercraft

Elekid Poke ball (Pokemon) papercraft

Decided to do a whole bunch of different life-size box Poke ball designs and I made a LOT, since I had so much fun making them XD so from now on, you’ll get to probably see at least 1-2 Poke ball papercrafts posted on my site for a long, long time.

They range from the normal in-game designs, to exclusive Pokemon designs I made up as OC’s. They are all relative in height, about 11 cm (not including the stand and the ears and accessories, if they have any), so they all fit together as a bunch. I made them as life-size Pokemon-themed boxes, since they can open and close like a box with a lid and they all have optional double-sided print pages for a colored inner side, so the box looks neater when built. The 2 buttons in the front are separate 3D parts glued on the front. They also all have optional stands, so you can place them inside and they don’t roll away.

*Note that all of them are more challenging to make, are more detailed and have smaller or thinner parts, so I do not recommend any of them to beginners. I think these are best suited for intermediate and experienced papercrafters, but who am I to say what you can and cannot do (;

**************

This is the OC Elekid Poke ball design papercraft box. It is unfolded to 21 cm (13 cm of the actual Poke ball height) and has 5 pages to print out (4 of them being double-sided).

The preview picture shows the unfolded Poke ball template that stands apart a bit, so it is easier to assemble with the inner part shown, but you can also see the closed preview and how it looks, just so you know how it looks closed.

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/846dab54f5

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts ***

**************

Hope you like the design. Enjoy and happy crafting~

Jinx (Arcane) papercraft

Jinx (Arcane) papercraft

Another papercraft a bit too late for the main hype XD just watched the series myself as I got time, and I fell in love with it immediately! Such a good series, it has everything! And that’s coming from me, because I freaking hate LOL and all of those type of games ;P I went with all of the ups and downs and not a single episode was boring. Really loved it! (And the same makers are going into another animation series as well, so I can’t wait what they come up with next!)

Anyway, because I fell in love with the series, and damn it hit me in the feeli’s all too deep, I had to do Powder aka Jinx, because I loved her most ;_; such tragedy, such an epic story, damn…

******************

The papercraft is unfolded to 30 cm and has 6 pages to print.

It consists of a 3D model of Jinx, with 2D 2-sided braids, 3D and optional 2D hands, a simple 3D gun she uses, and various add-ons, such as the belts, accessories, etc. Note that the top is also optional, since it’s an add-on, so the top shirt can be taken off (yes, boobie texture included under the shirt, so it’s all there).

************************************

*** This is a premium papercraft that you need to purchase in order to receive the PDFs and blank, locked PDO file for assembly. – You can buy and download the template here:

https://ko-fi.com/s/3a11f858b5

You can view all of my available premium papercrafts that are for sale on my Ko-fi page:

ko-fi.com/antyyyspapercrafts *** 

******************

No matter if you love or hate LOL, you HAVE to see this series! It’s such a good one, and each episode has it’s own universe of beautiful animations, 3d modeling, a wonderful and immersive story and characters you immediately fall in love with.

Hope you like Jinx as much as I do, enjoy and happy crafting~